16X160 (order code: 8.1616.00)

This profile is often used for constructing machine beds. It has four 8mm slots and three 5mm slots. T slot nuts are available for easy mounting of products.

19 x 270 Aluminium Profile

Often used for constructing machine beds, please note normal m8 nuts can be used. T nuts ITEM and Bosch are not compatible!

45 x 45 Bosch Compatible Profiles

There are two kinds of aluminium profile systems used. The 40x40(ITEM) type and the 45x45(Bosch) type. We have been selling item for a while. We now also offer Bosch profiles. Be careful with ordering additional items such as T-nuts and corner pieces. These items afford are not necessarily compatible...

90degree angle connector

With these connector it making 90 degree connections is very easy. The part is cast aluminium and very sturdy. These units are only compatible with ITEM profiles. The nuts and bolts for mounting are included.

90degree angle connector Bosch

With these connector it making 90 degree connections is very easy. The part is cast aluminium and very sturdy. This type is only compatible with BOSCH profiles. The connectors come with nuts and bolts included for mounting.

DCNC-Shearplates

These shear plates can be used to make connections that are stronger than the standard 90 degrees connectors. The sets include the plates plus all nuts and bolts. Further it also allows 180degrees angles to be made. Some examples are included in the manual, but the options are endless. If you need a type of connector that is not offered, send you proposal and we can make it for you...

DCNC_Aluminium_Endplates

We have manufactured these endplates as mechanical stops on our linear slide modules. But they could be used for other purposes as well.

DCNC_AngleConnector

When building Frames and other structures, we found that the standard 90 degree angle connectors, give very limited possibilities in what constructions can be made. In order to build a router that was slanted under a 80 degree angle we designed these AngleConnectors. If there is demand for other angles, we can make them...

Din 125A Rings

DIN 912 metric bolts

These bolts are commonly used in combination with our products

Drill Jigs

Drilling holes in the aluminum profiles can be quite tough when you dont have the right equipment. We have made some drilling jigs that will help you. At the moment we only have the JIG for item profiles. We will add jigs for Bosch and MiniTec upon request.

Handle Aluminium Black

Hinge Sturdy Cast Alu type

ISO 7380 Metric Screws

ITEM Plastic End Plates

To nicely finish your machine, add these End Plates to your profiles. It add a professional look to your machine, at a small extra cost.

ITEM Threaded End Plates

These sturdy aluminium end plates can be mounted to the end of the ITEM structural profiles. They will fit the 40x80(L) and 80x80(L)profiles. Thread size ranging from m10 to m20. The most common use is to mount feet under machines and structures, so easy adjustments can be made to level out the machines. They can also be used to mount wheels under a structure to make it mobile...

Locking nuts DIN985

M16 MachineFoot Mountplate

M16 MachineFoot SideMountplate

Machine Feet

We have a selection of machine feet available. Offered online are only the steel items that have been galvanized. On request we can offer Stainless units as well. The heads on the feet have a 360 degree round swivel ability. Further they can tilt up or down 20 degrees. The m8 feet can be mounted directly in the profiles after m8 thread has been tapped...

Machine Feet Dampers

These dampers can be used in combination with the machine feet which we offer. They help to reduce vibrations being transmitted from the machine to floor or visaversa.

Ratchet Handles

These handles have a ratchet system inside. Such that when space is tight its still possible to easily fix it in place. When the connection is tight enough, its also possible to orientate the handle in the required direction. Handles are often used for making quick fix or release systems in clamping of materials. Heavy duty item steel and aluminium not plastic...

SnapMagnet

T-Nut

T-nut to connect profiles to each other. Or to connect other items such as the drylin linear slides.

T-Nut Bosch

These T-nuts are compatible with the Bosch structural profiles. Please note there are 2 variants. NUT10 is most commonly used in the 45x45 and 90x90 series Bosch Profiles, the groove width is 10mm hence the name Nut 10. Nut 8 is used in the 60x60, 30x30 range of profiles, the groove width is 8mm.

T-Nut MiniTec

These T-nuts are compatible with MiniTec structural profiles

40*40

Type	Order Code	I (cm4)	Weight (kg/m)	Price/m	Price per cut (€)	Choose a size (m)	Amount (units)	Total Price (€)	Buy it
40x40	8.4040.00	13,9	2,4	€ 23.49	€ 1.95
40x40 L	8.4040.01	9,0	1,7	€ 15.92	€ 1.95
40x80	8.4080.00	101,2	4,5	€ 41.97	€ 2.95
40x80 L	8.4080.01	69,5	3,0	€ 27.69	€ 2.95
40x120	8.4012.00	322,6	6,6	€ 75.59	€ 2.95
40x120 L	8.4012.01	220,5	4,4	€ 52.82	€ 2.95
40x160	8.4016.00	739,6	8,6	€ 99.12	€ 2.95
40x160 L	8.4016.01	500,0	5,6	€ 67.18	€ 2.95

80*80

Type	Order Code	I (cm4)	Weight (kg/m)	Price/m	Price per cut (€)	Choose a size (m)	Amount (units)	Total Price (€)	Buy it
80x80	8.8080.00	188	7,2	€ 71.39	€ 2.95
80x80 L	8.8080.01	134	5,3	€ 54.58	€ 2.95
80x120	8.8012.00	574,8	10,8	€ 125.42	€ 2.95
80x120 L	8.8012.01	421,7	8,1	€ 92.39	€ 2.95
80x160	8.8016.00	1228,3	13,5	€ 163.82	€ 2.95
80x160 L	8.8016.01	907,9	10,2	€ 117.61	€ 2.95