| |
Tools A listing of tools that can be supplied from stock.
This is a selection of the total components that we can offer.
If you're looking for a component which isn't listed you can always send an email to me for an inquiry.
When ordering in large quantities it is possible to negotiate a price.
| Centre Drills DIN333 Form A
Centre Drill that can be used in lathes to make centre holes. We use this exact model in our CNC lathes. | d1= 3.15mm d2=8.00mm L1 = 50mm : | € 8.36 (excl. tax) |  | |
|
| Colinbus Profiler Add-Ons
The colinbus profiler is a small DIY build cnc router. The standard included milling motor is the weak link in the design. However replacing it by a much better kress motor cannot be done directly without changing some parts on the machine. The parts offered in this section of the site will make the kress directly compatible with the machine... | Colinbus Kress + Vacuum fixture : | € 31.51 (excl. tax) | | | Colinbus improved Vertical mount : | € 16.76 (excl. tax) | | | ProfilerPro improved Vertical mount : | € 22.68 (excl. tax) | | |
|
| Corner Radius Endmills TiAIN Coating
The tools improve productivity and reduce costs. A sharp corner of an end mill is its weakest point. The corner radius design strengthens the end mill by reducing chipping and providing longer tool life. In mold applications where ball end mills have traditionally been used, a corner radius end mill will remove more material faster, improving productivity... | 3mm Corner Radius Endmill 2Flute TiAIN Coating : | € 10.88 (excl. tax) | | | 6mm Corner Radius Endmill 2Flute TiAIN Coating : | € 15.92 (excl. tax) | | |
|
| DCNC BHP 3 40
A quality tool bit that can be used for engraving wood,plastics, and non ferro metals. | DCNC BHP 3 40 : | € 6.30 (excl. tax) | | |
|
| DCNC BHP 6 40
A quality tool bit that can be used for engraving wood,plastics, and non ferro metals. | DCNC BHP 6 40 : | € 12.18 (excl. tax) | | |
|
| DCNC Toolholder
The DCNC toolholder is similar to the kress clamps but has some improvements. After working with the kress clamps in our cnc machines we were annoyed that the toolchanges took a lot of time. This problem was first solved by adding a retaining nut for each clamp. But this meant a price of about 30EUR per tool. Further there was no way to fixate the tool length... | 8 to 4mm : | € 18.91 (excl. tax) | | | 8 to 5mm : | € 18.91 (excl. tax) | | | 8 to 10mm : | € 18.91 (excl. tax) | | |
|
| DCNC-ToolSetter
With this measurement tool its possible to do automatic tool height measurements. We have made documentation and a macro for use with USBCNC, but it will also work with other software. | DCNC-Toolsetter : | € 67.22 (excl. tax) | | |
|
| Destaco Quick Clamps
We use these clamps in many of our own designs. They are very fast. Lay down the product, press down the clamp and its done.
| Destaco 225-U "Lever horizontal when clamped" : | € 23.49 (excl. tax) | | | Destaco 201-U "Lever vertical when clamped"
: | € 13.40 (excl. tax) | | | Damper 20 x 15 E 55sh M6i RVS-316 : | € 2.51 (excl. tax) | | |
|
| EMP-02-Touchprobe
This tool is both a 3 axis touch probe. The design is based on a 3 point contact. The precision is dependent on how well the probe has been centered by the user.I have found it to be a very nice tool, to do zeroing of the workpiece or even to scan an object into a point cloud. On youtube there is a nice movie of this probe in action http://www.youtube... | EMP-02-Touchprobe : | € 210.08 (excl. tax) | | | Styli Straight DK_2.0mm/ L 22.0mm/ ML_9.0mm : | € 22.68 (excl. tax) | | | Styli Straight DK_2.0mm/ L 40.0mm/ ML_34.0mm : | € 29.40 (excl. tax) | | | Styli Cilinder DK_1.5mm/ L 11.0mm/ ML_1.5mm : | € 19.32 (excl. tax) | | |
|
| Kress Clamping Nut
Extra clamping nut. To save time with tool changes some people have clamping nut for each clamp. | Kress Clamping Nut : | € 8.36 (excl. tax) | | |
|
| Kress Flexible Shaft
The flexible shaft is optimally applicable for deburring, cleansing and polishing of narrow and inaccessible places
This flexible shaft is industrial quality, very sturdy. | Kress Flexible Shaft : | € 164.70 (excl. tax) | | | Kress Table Holding Device : | € 33.57 (excl. tax) | | | FlexShaft 6,35mm Collet : | € 16.76 (excl. tax) | | | FlexShaft 8,00mm Collet : | € 16.76 (excl. tax) | | |
|
| Kress FM 530
It is high quality and includes an 8mm clamp. | Single Unit : | € 93.24 (excl. tax) | | |
|
| Kress FME 1050
It has more features than the 800 version, and still includes an 8mm clamp. Further it is available from stock. | Kress FME 1050 : | € 126.01 (excl. tax) | | | Kress 6m Mains Cable Patented Quick Action Lock : | € 15.92 (excl. tax) | | | Kress FME 1050-1 5000/25000 RPM : | € 134.41 (excl. tax) | | |
|
| Kress FME 800
It has more features than the 500 version, but still includes an 8mm clamp. | Single Unit : | € 109.20 (excl. tax) | | | Kress FME 800 110V USA version : | € 116.80 (excl. tax) | | |
|
| Kress Spare Brushes 800/1050FME(1)
A set of spare brushes for when the ones one your milling motor have worn out. The kress brushes have an automatic shut off function to prevent damage to the motor when brushes are worn. | Pair (left and right) : | € 5.80 (excl. tax) | | |
|
| Kress Spare MainShaft
A spare mainshaft for the kress 530/800/1050.
But thats not what we use it for :). It is most often sold as a toolholder, for machines that have ER25 or larger collets. Since the tools is fixed in the holder, when doing a toolchange one can use the value stored in the Tool table of the machinesoftware (USBCNC) for the length offset... | Single Piece : | € 17.61 (excl. tax) | | | Ball Bearing 6002(SKF) : | € 5.03 (excl. tax) | | |
|
| Kress Wet/Dry Vacuum 1200 NTX EA
A high quality wet and dry vacuum produced by Kress. It has a powerfull 1200Watt 2 -stage electric motor. And can create an under pressure of 210 mbar. It is a great motor to use for suction of chips during milling. But can also be used for short periods to supply vacuum for vacuum tables... | Kress Vacuum 1200 NTX EA : | € 142.85 (excl. tax) | | | Filter bag for 1200 NTX EA , 5 pcs : | € 10.08 (excl. tax) | | |
|
| Kress-Mounting Block
This block can be used to mount the kress motor to a Z axis or other fixture. The block is constructed from 20mm thick aluminium which makes it a sturdy attachment. | Kress Mounting Block : | € 27.31 (excl. tax) | | | Kress_Mounting_Block_V2.0_(80x80x20mm) : | € 28.15 (excl. tax) | | |
|
| Mini Vise
A small Vise that can be used for holding small parts. Model and toolmakers use these often for very small parts. The jaw can only opening is 25mm, jaw width is also 25mm. The unit is hardened and precision ground, +/- 0,01mm. | Mini Vise LxWxH: 65x25.4x29 MM : | € 21.00 (excl. tax) | | |
|
| Spotting Drills
These drills can be used in a CNC machine to do the spot drilling of holes. | 6mm 120deg spotting drill : | € 5.00 (excl. tax) | | | 8mm 120deg spotting drill : | € 5.84 (excl. tax) | | |
|
| VHM-Mini-Ballnose Endmills
These mills are for those doing real 3D milling or 4th axis work. Due to the long cutting edges, they are very versatile. Allowing more material to be removed in a single pass | VHM BallnoseLong 1mm : | € 15.92 (excl. tax) | | | VHM BallnoseLong 1,5mm : | € 15.92 (excl. tax) | | | VHM BallnoseLong 2mm : | € 15.92 (excl. tax) | | | VHM BallnoseLong 2,5mm : | € 15.92 (excl. tax) | | | VHM BallnoseLong 3mm : | € 15.92 (excl. tax) | | |
|
|
| | | Your shopping |
|
| You have 0 item(s). | |
Your basket is empty. | |
|
|
