A listing of teknomotor that can be supplied from stock.
This is a selection of the total components that we can offer.
If you're looking for a component which isn't listed you can always send an email to me for an inquiry.
When ordering in large quantities it is possible to negotiate a price.
ElectroSpindels (Always in Stock)
These Electrospindels are the selection of models that we always have in stock from Teknomotor. We can offer a total of 50 models of Electro spindels, and therefore have made a selection to sell from stock. All Electrospindels in the catalog we can also supply but they have a longer leadtime, minimum 2 weeks and a maximum of 5 weeks leadtime...
C31/40-C-DBS-P-ER20-0.7KW-24000RPM :
€ 378.14 (excl. tax)
C41/47-B-DB-P-ER25-HY-1.6KW-24000RPM :
€ 647.05 (excl. tax)
C41/47-C-DB-P-ER25-HY-2.0KW-24000RPM :
€ 680.66 (excl. tax)
C51/60-A-2DB-P-ER32-HY-3.3KW-24000RPM :
€ 986.51 (excl. tax)
ElectroSpindels / DC fan Cooling
The Spindels are identical to the normal ElectroSpindels. But have a different type of cooling. Instead of a mechanical fan that turns at the same speed as the shaft, these have a 24V cooling fan. This type of motor is intended for 2 types of clients. Most often it is bought by those who wish to have a motor that makes much less noise...
C41/47-B-DB-P-ER25-HYSV-1.6KW-24000RPM_24VDC fan :
€ 745.37 (excl. tax)
HF Spindels (Always in Stock)
These HF spindels are the selection of models that we always have in stock from Teknomotor. We can offer a total of 20 models of HF spindels, and therefore have made a selection to sell from stock. All HF spindels in the catalog we can also supply but they have a longer leadtime, minum 2 weeks and a maximum of 5 weeks leadtime...
C31/40-C-SB-P-ER20-0.7KW-18000RPM :
€ 218.48 (excl. tax)
C41/47-B-SB-P-ER20-1.6KW-18000RPM :
€ 290.75 (excl. tax)
C41/47-C-SB-P-ER20-2.0KW-18000RPM :
€ 319.32 (excl. tax)
C41/47-C-SB-P-ER20-1.5KW between 12000-18000 RPM :
€ 319.32 (excl. tax)
NC35-A-SB-P-ER16-0.33KW-18000RPM :
€ 201.67 (excl. tax)
Keys for ER Nuts
Please note, when you purchase a TeknoMotor we already include this item. Its sold as spare, or for those who would like to have some extra
ER 16 / Wrench 17mm :
€ 6.71 (excl. tax)
ER 20 / Wrench 22mm :
€ 6.71 (excl. tax)
ER 25 / Wrench 27mm :
€ 6.71 (excl. tax)
ER 32 / Wrench 32mm :
€ 6.71 (excl. tax)
Set of Collets - Normal Quality
These collets are normal collets with an acceptable run-out.
We also have high quality collet sets.
For the more demanding customers we have better quality sets. The price is much higher..
ER 16 1 to 10mm 10 pieces :
€ 84.03 (excl. tax)
ER 20 1 to 13mm 13 pieces :
€ 88.23 (excl. tax)
ER 25 1.5 to 16mm 15 pieces :
€ 92.43 (excl. tax)
ER 32 2 to 20 mm 19 pieces :
€ 126.04 (excl. tax)
Single ER 16 Collets
These collets are normal collets with an acceptable run-out. We also have high quality collet sets. For the more demanding customers we have better quality sets. The price is much higher.
Single Collet ER 16 1.00mm :
€ 10.92 (excl. tax)
Single Collet ER 16 2.00mm :
€ 10.92 (excl. tax)
Single Collet ER 16 3.00mm :
€ 10.92 (excl. tax)
Single Collet ER 16 4.00mm :
€ 10.92 (excl. tax)
Single Collet ER 16 5.00mm :
€ 10.92 (excl. tax)
Single Collet ER 16 6.00mm :
€ 10.92 (excl. tax)
Single Collet ER 16 7.00mm :
€ 10.92 (excl. tax)
Single Collet ER 16 8.00mm :
€ 10.92 (excl. tax)
Single Collet ER 16 9.00mm :
€ 10.92 (excl. tax)
Single Collet ER 16 10.00mm :
€ 10.92 (excl. tax)
Single ER 20 Collets
These collets are normal collets with an acceptable run-out. We also have high quality collet sets. For the more demanding customers we have better quality sets. The price is much higher.
Single Collet ER20 1.00mm :
€ 9.20 (excl. tax)
Single Collet ER20 2.00mm
:
€ 9.20 (excl. tax)
Single Collet ER20 3.00mm :
€ 9.20 (excl. tax)
Single Collet ER20 4.00mm :
€ 9.20 (excl. tax)
Single Collet ER20 5.00mm :
€ 9.20 (excl. tax)
Single Collet ER20 6.00mm :
€ 9.20 (excl. tax)
Single Collet ER20 7.00mm :
€ 9.20 (excl. tax)
Single Collet ER20 8.00mm :
€ 9.20 (excl. tax)
Single Collet ER20 9.00mm :
€ 9.20 (excl. tax)
Single Collet ER20 10.00mm :
€ 9.20 (excl. tax)
Single Collet ER20 11.00mm :
€ 9.20 (excl. tax)
Single Collet ER20 12.00mm :
€ 9.20 (excl. tax)
Single Collet ER20 13.00mm :
€ 9.20 (excl. tax)
Single Collet ER20 3/32 Inch (2.38mm) :
€ 10.04 (excl. tax)
Single Collet ER20 1/8Inch (3.175mm) :
€ 10.04 (excl. tax)
Single Collet ER20 1/4Inch (6.35mm) :
€ 10.04 (excl. tax)
Single Collet ER20 3/8Inch (9.525mm) :
€ 10.04 (excl. tax)
Single ER 25 Collets
These collets are normal collets with an acceptable run-out. We also have high quality collet sets. For the more demanding customers we have better quality sets. The price is much higher.
Single Collet ER 25 1.00mm :
€ 8.36 (excl. tax)
Single Collet ER 25 2.00mm :
€ 8.36 (excl. tax)
Single Collet ER 25 3.00mm :
€ 8.36 (excl. tax)
Single Collet ER 25 4.00mm :
€ 8.36 (excl. tax)
Single Collet ER 25 5.00mm :
€ 8.36 (excl. tax)
Single Collet ER 25 6.00mm :
€ 8.36 (excl. tax)
Single Collet ER 25 7.00mm :
€ 8.36 (excl. tax)
Single Collet ER 25 8.00mm :
€ 8.36 (excl. tax)
Single Collet ER 25 9.00mm :
€ 8.36 (excl. tax)
Single Collet ER 25 10.00mm :
€ 8.36 (excl. tax)
Single Collet ER 25 11.00mm :
€ 8.36 (excl. tax)
Single Collet ER 25 12.00mm :
€ 8.36 (excl. tax)
Single Collet ER 25 13.00mm :
€ 8.36 (excl. tax)
Single Collet ER 25 14.00mm :
€ 8.36 (excl. tax)
Single Collet ER 25 15.00mm :
€ 8.36 (excl. tax)
Single Collet ER 25 16.00mm :
€ 8.36 (excl. tax)
Spare Collet Clamping Nut
These are sold as spare parts. When you purchase a TeknoMotor from us this part is already included. Please note most of the price is in the fact that its balanced to be able to run 24000 RPM.
NUT GTS 16 Balanced / (for ER16) :
€ 17.61 (excl. tax)
NUT GTS 20 Balanced / (for ER20) :
€ 18.45 (excl. tax)
NUT GTS 25 Balanced / (for ER25) :
€ 27.69 (excl. tax)
NUT GTS 32 Balanced / (for ER32) :
€ 29.37 (excl. tax)
TeknoMotor CharlyRobot Adapter
This adapter has been designed for the CharlyRobot 4U machine(
http://www.charlyrobot.com)
It allows a C31/40-C-DBS-P-ER20-0.7KW-24000RPM to be easily mounted to the existing machine. Also it has an improved mount for a vacuumhose integrated into the design.
Mount+Vacuum Connector :
€ 63.02 (excl. tax)
VerticalMount :
€ 42.01 (excl. tax)
TeknoMotor MountingPlate
This mounting plate can be used to mount a Tekno motor easily to a machine. We use it specifically for the 40x160L aluminium profile. But it can also be used in othe situations. Its been designed to fit the c31/40 and C41/47 models.
