ITEM
16X160
This profile is often used for constructing machine beds. It has four 8mm slots and three 5mm slots. T slot nuts are available for easy mounting of products.
40x120 L
40x160 L
80x160 L
T-Nut
T-nut to connect profiles to each other. Or to connect other items such as the drylin linear slides.| T-NUT M4 | € 0.84 (o. MwSt.)  |
| T-NUT M5 | € 0.84 (o. MwSt.) |
| T-NUT M6 | € 0.84 (o. MwSt.) |
| T-NUT M8 | € 0.84 (o. MwSt.) |
90 Degree Profile Connector
| L=40mm | € 5.99 (o. MwSt.) |
| L=80mm | € 5.99 (o. MwSt.) |
45 Degree Angle Connector
Das ist eine neue Art von Winkel-Stecker, die Profile unter einem Winkel von 45 Grad angeschlossen werden können. Eine solche Verbindung könnte auch durch Schneiden Sie das Profil unter einem Winkel von 45 Grad vorgenommen werden. In der Praxis ist dies eine ziemlich schwierige Prozedur. Mit diesem Teil der Schnitte gerade werden, und die Verbindung ist einfach...| 40mm width | € 9.99 (o. MwSt.) |
90degree angle connector
With these connector it making 90 degree connections is very easy. The part is cast aluminium and very sturdy. These units are only compatible with ITEM profiles. The nuts and bolts for mounting are included.| 40x40 90 degree connector | € 5.84 (o. MwSt.) |
| 80x80x38width 90 degree connector | € 10.50 (o. MwSt.) |
Drill Jigs
Drilling holes in the aluminum profiles can be quite tough when you don't have the right equipment. We have made some drilling jigs that will help you. At the moment we only have the JIG for item profiles. | ITEM Drill JIG (JIG + Clamp + Drill 7,5mm) | € 34.99 (o. MwSt.) |
| ITEM Drill JIG (JIG + Clamp + Drill 14mm) | € 39.99 (o. MwSt.) |
Handle Aluminium Black
| Handle Aluminium Black 120mm Straight | € 4.45 (o. MwSt.) |
| Handle Aluminium Black 120mm Angle | € 6.13 (o. MwSt.) |
ITEM Plastic End Plates
To nicely finish your machine, add these End Plates to your profiles. It add a professional look to your machine, at a small extra cost.| 16x160 EndPlate | € 2.09 (o. MwSt.) |
| 40x40 EndPlate | € 0.83 (o. MwSt.) |
| 40x80 EndPlate | € 1.25 (o. MwSt.) |
| 40x120 EndPlate | € 3.32 (o. MwSt.) |
| 40x160 EndPlate | € 5.00 (o. MwSt.) |
| 80x80 EndPlate | € 2.14 (o. MwSt.) |
| 80x120 EndPlate | € 6.68 (o. MwSt.) |
| 80x160 EndPlate | € 8.24 (o. MwSt.) |
DCNC Shearplates
These shear plates can be used to make connections that are stronger than the standard 90 degrees connectors. The sets include the plates plus all nuts and bolts. Further it also allows 180degrees angles to be made. Some examples are included in the manual, but the options are endless. If you need a type of connector that is not offered, send you proposal and we can make it for you...| DCNC-Shearplate 90-4040 | € 9.66 (o. MwSt.) |
| DCNC-Shearplate 90-8080 | € 14.71 (o. MwSt.) |
| DCNC-Shearplate 180-4040 | € 12.18 (o. MwSt.) |
| DCNC-Shearplate 180-8080 | € 18.07 (o. MwSt.) |
| DCNC-Angleplate 80-160 | € 10.50 (o. MwSt.) |
| DCNC-Topplate 80x80- 40 | € 13.87 (o. MwSt.) |
Hinge Sturdy Cast Alu type
| Hinge Sturdy Cast Alu type | € 8.39 (o. MwSt.) |
ITEM Threaded End Plates
Diese starken Aluminiumendplatten können zum Ende der strukturellen Profile des EINZELTEILS angebracht werden. Sie passen das 40x80 (L) und Profile 80x80 (L). Gewindegröße, die von m10 zu m20 reicht. Der allgemeinste Gebrauch ist, Füße unter Maschinen und Strukturen anzubringen, also können einfache Justagen vorgenommen werden, um die Maschinen auszugleichen...| Endplate 40x80 M16 | € 11.93 (o. MwSt.) |
| Endplate 80x80 M12 | € 15.29 (o. MwSt.) |
| Endplate 80x80 M16 | € 15.29 (o. MwSt.) |
| Endplate 80x80 M20 | € 15.29 (o. MwSt.) |
Breaking news
NEUES PRODUKT 4,0 nm NEMA 34 Motor
Ein Low-Cost-Alternative zum 4,5 Nm Motor2011-11-13
NEUES Produkt CPU/Sensor Holder
Ein Produkt, das schützt Ihre USBCNC CPU und ermöglicht den einfachen Anschluss von Referenz-Sensor, Not-Aus-, Probe-und MPG-Handrad2011-09-07
New language added.
Now also available in Spanish. Ahora también disponible en español (haz click en la bandera de españa).
Wir abliefern Weltweit!
