Linear Motion
DCNC LSM 40x160L
Originally this Linear Slide Module was designed for our CNC surfboard shaping machine. Since that time it has been redesigned with many improvements. It is using the best components, HIWIN guides and ISEL ballscrews. The custom parts are CNC milled. One of the unique features is that it takes only a few seconds to couple 2 of these modules to get an XY table...
| DCNC LSM 40x160L DIY R=250 mm - L=460 | € 611.01 (ex. vat)  |
| DCNC LSM 40x160L DIY R=500 mm - L=710 | € 688.62 (ex. vat) |
| DCNC LSM 40x160L DIY R=750 mm - L=960 | € 766.24 (ex. vat) |
| DCNC LSM 40x160L DIY R= mm - L=460 | € 661.01 (ex. vat) |
DCNC Sensor Activator
| DCNC Sensor Activator Set | € 25.00 (ex. vat) |
DCNC Router Bridge Junction Box Assembly
| DCNC Router Bridge Junction Box Assembly | € 97.50 (ex. vat) |
40x160L Junction Box Assembly
| 40x160L Junction Box Assembly | € 138.97 (ex. vat) |
DCNC LSM 80x160,8E Bridge Ballscrew
DCNC LSM Bridge| Bridge DIY R=250 mm - L=460 | € 1,002.30 (ex. vat) |
| Bridge DIY R=500 mm - L=710 | € 1,094.37 (ex. vat) |
| Bridge DIY R=750 mm - L=960 | € 1,186.44 (ex. vat) |
| Bridge DIY R= mm - L=1410 | € 1,352.16 (ex. vat) |
DCNC LSM 80x80L Rack & Pinion
| R=Custom R=1200 mm - L=1500 | € 1,028.09 (ex. vat) |
| R=Custom R=1700 mm - L=2000 | € 1,136.18 (ex. vat) |
| R=Custom R=2700 mm - L=3000 | € 1,352.34 (ex. vat) |
| R=Custom R=3700 mm - L=4000 | € 1,568.51 (ex. vat) |
| R=Custom R= mm - L=2000 | € 1,136.18 (ex. vat) |
DCNC Zaxis
Making the Z axis of a CNC machine is for most client the more difficult part in the construction. Here a full assembled and tested Z axis is offered. With a range of 12CM, its more than long enough for most applications.| DCNC-Z-Axis-RTR | € 281.50 (ex. vat) |
| DCNC-Z-Axis-DIY | € 249.99 (ex. vat) |
DCNC BeltDrive Module
These linear slide belt drive modules, are a very economic way to make a CNC system. One does need to take into account that its intended for low load systems such as Scanning or Plasma cutting equipment.| DCNC BeltDrive Module DIY R=340 mm - L=500 | € 358.63 (ex. vat) |
| DCNC BeltDrive Module DIY R=590 mm - L=750 | € 387.40 (ex. vat) |
| DCNC BeltDrive Module DIY R=840 mm - L=1000 | € 416.17 (ex. vat) |
| DCNC BeltDrive Module DIY R= mm - L=500 | € 358.63 (ex. vat) |
16mm LS Module Bellow
A very high quality bellow, to keep dirt and chips away from the ballscrew and linearslides. The ratio from stretched to compressed is about 1 to 10. So 10 meters stretched give 1m compacted. The inserts are made from PVC and can be connected to the CNC milled parts, connection holes are already there...Bellow mountplate
Using this plate its much easier to mount our bellow to the LSM module. Also it gives the unit a much cleaner look. When making an LSM with a below on both sides of the LSM slideplate, 4 Outside and 4 inside plates are needed. We include the requires mounting screws.| Outside | € 4.99 (ex. vat) |
| Inside | € 4.99 (ex. vat) |
16mm LS Module Parts
These parts can be used in combination with the 16mm ballscrews to build a Linearslide module. Its also possible to buy a complete assembled kit, see the machines section.| 40x160L- BearingPlate for 16mm Ballscrew | € 40.99 (ex. vat) |
| 40x160L- SlidePlate for 16mm Ballscrew | € 74.99 (ex. vat) |
| 40x160L- XY Bracket to mount 16mm LS to 25mm LS | € 64.99 (ex. vat) |
| 40x160L- EndPlate for 16mm Ballscrew | € 29.99 (ex. vat) |
DCNC LSM 80x80L Module Parts
These parts can be used in combination with the 25mm ballscrews to build a Linearslide module. Its also possible to buy a complete assembled kit, see the machines section.
Breaking news
NEW PRODUCT 4.0NM NEMA 34 motor
A lowcost alternative to the 4,5nm motor we already had.2011-11-13
NEW Product CPU/Sensor Holder
A product which protects your USBCNC CPU, and allows easy connection of ReferenceSensor, Emergencystop, Probe and MPG Handwheel2011-09-07
New language added.
Now also available in Spanish. Ahora también disponible en español (haz click en la bandera de España).
We supply worldwide!
