Milling Cutter
Set of 5 Deep Reach Solid Carbide Mills for Alumin
Set of 5 Solid Carbide Mills for Aluminum&Plastics. Tool Geometry especially for Aluminum (2 flutes) and Plastics. Deap reach tools with long flute length. Intended for applications where a normal tool is not long enough...
| Set of 5 Deep Reach Solid Carbide Mills for Alumin | € 59.99 (ex. vat)  |
Set of 5 Solid Carbide Mills for Aluminum&Plastics
Set of 5 Solid Carbide Mills for Aluminum&Plastics, shaft size 3mm on all tools, so only one collet needed. Tool Geometry especially for Aluminum (2 flutes) and Plastics. Tip diameters starting at 1.00mm and increasing to 3.00mm with 0.5mm steps.| Set of 5 Solid Carbide Mills for Aluminum&Plastics | € 39.99 (ex. vat) |
V-groove cutter VHM
V-groove cutter made of VHM. Designed for chamfering of circuitboards, isolation routing, milling break-out edges in PCB.
Mounting shaft is always 3,175mm. The diameter and the angle of the tip can be chosen. Mosten often sold is the 30 degree and 2mm diameter tip.| 30 degree tip 2,0mm diameter | € 9.99 (ex. vat) |
Corner Radius Endmills TiAIN Coating
The tools improve productivity and reduce costs. A sharp corner of an end mill is its weakest point. The corner radius design strengthens the end mill by reducing chipping and providing longer tool life. In mold applications where ball end mills have traditionally been used, a corner radius end mill will remove more material faster, improving productivity...| 3mm Corner Radius Endmill 2Flute TiAIN Coating | € 10.99 (ex. vat) |
| DIA 5.00mm SHANK 5.00mm FL 16.0mm OAL=50mm CR=0.5mm | € 13.99 (ex. vat) |
| 6mm Corner Radius Endmill 2Flute TiAIN Coating | € 19.99 (ex. vat) |
DCNC BHP 3 40
A quality tool bit that can be used for engraving wood,plastics, and non ferro metals.| DCNC BHP 3 40 | € 6.30 (ex. vat) |
DCNC BHP 6 40
A quality tool bit that can be used for engraving wood,plastics, and non ferro metals.| DCNC BHP 6 40 | € 12.99 (ex. vat) |
DCNC Toolholder
The DCNC toolholder is similar to the kress clamps but has some improvements. After working with the kress clamps in our cnc machines we were annoyed that the toolchanges took a lot of time. This problem was first solved by adding a retaining nut for each clamp. But this meant a price of about 30EUR per tool. Further there was no way to fixate the tool length...| 8 to 4mm | € 18.91 (ex. vat) |
| 8 to 5mm | € 18.91 (ex. vat) |
| 8 to 10mm | € 18.91 (ex. vat) |
Endmills for Aluminium
These single flute endmills are especially suited for cutting aluminium. They are made from solid carbid (VHM), and are right hand cutting with a right hand spiral.
See a movie of the cutters in action on youtube.
http://www.youtube.com/watch?v=Q9lZm6AQc-g&feature=player_profilepage| 2mm Endmill for Aluminium | € 12.49 (ex. vat) |
| 2.5mm Endmill for Aluminium | € 13.49 (ex. vat) |
| 3mm Endmill for Aluminium | € 13.49 (ex. vat) |
| 4mm Endmill for Aluminium | € 15.49 (ex. vat) |
| 5mm Endmill for Aluminium | € 18.99 (ex. vat) |
| 6mm Endmill for Aluminium Short CL18mm | € 22.49 (ex. vat) |
| 6mm Endmill for Aluminium Long CL25mm | € 26.99 (ex. vat) |
| 8mm Endmill for Aluminium Short CL22mm | € 33.49 (ex. vat) |
| 8mm Endmill for Aluminium LongCL40mm | € 40.49 (ex. vat) |
| 10mm Endmill for Aluminium | € 53.99 (ex. vat) |
| 12mm Endmill for Aluminium | € 69.49 (ex. vat) |
Endmills for plastics
Solid carbide one flute endmills for plastic, right hand cutting with left hand spiral. Especially suited for cutting all plastics, glassfibre reinforced polyesters as well as carbonfiber.| 2mm Endmill for plastics | € 12.49 (ex. vat) |
| 2,5mm Endmill for plastics | € 13.49 (ex. vat) |
| 3mm Endmill for plastics | € 13.49 (ex. vat) |
| 4mm Endmill for plastics | € 15.49 (ex. vat) |
| 5mm Endmill for plastics | € 18.99 (ex. vat) |
| 6mm short Endmill for plastics | € 22.49 (ex. vat) |
| 6mm long Endmill for plastics | € 25.99 (ex. vat) |
| 8mm short Endmill for plastics | € 33.49 (ex. vat) |
| 8mm long Endmill for plastics | € 40.49 (ex. vat) |
| 10mm Endmill for plastics | € 55.99 (ex. vat) |
| 12mm Endmill for plastics | € 70.49 (ex. vat) |
Indexable Endmills
These indexable endmills work very well in steel and also cast iron. When doing modifications to the BF20 and BF30 cast iron parts we use these cutters.The different diameter mills all use the samee insert (except the 30mm). So you only need to stock one type of inserts.| 10mm Indexable Endmill + 10 inserts + Torxtool | € 55.42 (ex. vat) |
| 12mm Indexable Endmill + 10 inserts+ Torxtool | € 58.78 (ex. vat) |
| 16mm Indexable Endmill + 10 inserts+ Torxtool | € 61.30 (ex. vat) |
| 20mm Indexable Endmill + 10 inserts+ Torxtool | € 64.66 (ex. vat) |
| 25mm Indexable Endmill + 10 inserts+ Torxtool | € 69.71 (ex. vat) |
| 10 x Extra Inserts Indexable Endmills 10,12,16,20,25mm | € 40.33 (ex. vat) |
| 30mm RoundDowel Indexable Endmill + 10 inserts+ Torxtool | € 41.97 (ex. vat) |
| 10 x Extra Inserts 30mm RoundDowel Indexable Endmills 30mm | € 29.37 (ex. vat) |
| 1 x Inserts for Milling Aluminium 10,12,16,20,25mm | € 10.41 (ex. vat) |
Mini End Mills, Three Flutes
These are mini endmills which work very nice with the kress and other hobby motors. The pricing is quite nice. It has some features which makes it nice for the hobbyist. It no problem to drill with this endmill for example. Another nice feature is the clamped diameter of all these mills is 6mm. So you dont need special clamps...| Mini End Mill short 1.5mm | € 7.99 (ex. vat) |
| Mini End Mill short 2mm | € 7.99 (ex. vat) |
| Mini End Mill short 2.5mm | € 7.99 (ex. vat) |
| Mini End Mill short 3mm | € 7.99 (ex. vat) |
| Mini End Mill short 3.5mm | € 7.99 (ex. vat) |
| Mini End Mill short 4mm | € 7.99 (ex. vat) |
| Mini End Mill short 4.5mm | € 7.99 (ex. vat) |
| Mini End Mill short 5mm | € 7.99 (ex. vat) |
| Mini End Mill short 5.5mm | € 7.99 (ex. vat) |
| Mini End Mill short 6mm | € 7.99 (ex. vat) |
| Mini End Mill long 2mm | € 8.99 (ex. vat) |
| Mini End Mill long 2.5mm | € 8.99 (ex. vat) |
| Mini End Mill long 3mm | € 8.99 (ex. vat) |
| Mini End Mill long 3.5mm | € 8.99 (ex. vat) |
| Mini End Mill long 4mm | € 8.99 (ex. vat) |
| Mini End Mill long 4.5mm | € 8.99 (ex. vat) |
| Mini End Mill long 5mm | € 8.99 (ex. vat) |
| Mini End Mill long 5.5mm | € 8.99 (ex. vat) |
| Mini End Mill long 6mm | € 8.99 (ex. vat) |
Mini End Mills, Two Flutes
These are the smallest end Mills that we can offer. Going down to 0.80mm. The mills have 2 flutes and a very good transport of chips. | Mini Mill 2 flutes 0.40mm | € 9.20 (ex. vat) |
| Mini Mill 2 flutes 0.50mm | € 9.20 (ex. vat) |
| Mini Mill 2 flutes 0.60mm | € 9.20 (ex. vat) |
| Mini Mill 2 flutes 0.70mm | € 9.20 (ex. vat) |
| Mini Mill 2 flutes 0.80mm | € 7.52 (ex. vat) |
| Mini Mill 2 flutes 0.90mm | € 7.52 (ex. vat) |
| Mini Mill 2 flutes 1.00mm | € 7.52 (ex. vat) |
| Mini Mill 2 flutes 1.10mm | € 7.52 (ex. vat) |
| Mini Mill 2 flutes 1.20mm | € 7.52 (ex. vat) |
| Mini Mill 2 flutes 1.30mm | € 7.52 (ex. vat) |
| Mini Mill 2 flutes 1.40mm | € 7.52 (ex. vat) |
| Mini Mill 2 flutes 1.50mm | € 7.52 (ex. vat) |
| Mini Mill 2 flutes 2.00mm : | € 7.52 (ex. vat) |
| Mini Mill 2 flutes 3.00mm | € 7.52 (ex. vat) |
VHM-Endmill-Alu-2 Flute
These two flute endmills are especially suited for cutting aluminium, plastic and copper alloys (non ferrous metals). They are made from solid carbid (VHM). | 1.00mm VHM-Endmill-Alu-2 Flute | € 12.99 (ex. vat) |
| 1.50mm VHM-Endmill-Alu-2 Flute | € 12.99 (ex. vat) |
| 2.00mm VHM-Endmill-Alu-2 Flute | € 11.49 (ex. vat) |
| 2.50mm VHM-Endmill-Alu-2 Flute | € 11.49 (ex. vat) |
| 3.00mm VHM-Endmill-Alu-2 Flute | € 10.99 (ex. vat) |
| 4.00mm VHM-Endmill-Alu-2 Flute | € 12.99 (ex. vat) |
| 5.00mm VHM-Endmill-Alu-2 Flute | € 15.49 (ex. vat) |
| 6.00mm VHM-Endmill-Alu-2 Flute | € 18.99 (ex. vat) |
| 8.00mm VHM-Endmill-Alu-2 Flute | € 26.99 (ex. vat) |
| 10.00mm VHM-Endmill-Alu-2 Flute | € 40.49 (ex. vat) |
| 12.00mm VHM-Endmill-Alu-2 Flute | € 53.99 (ex. vat) |
| 14.00mm VHM-Endmill-Alu-2 Flute | € 76.49 (ex. vat) |
| 16.00mm VHM-Endmill-Alu-2 Flute | € 103.49 (ex. vat) |
| 18.00mm VHM-Endmill-Alu-2 Flute | € 134.99 (ex. vat) |
| 20.00mm VHM-Endmill-Alu-2 Flute | € 179.99 (ex. vat) |
VHM-Mini-Ballnose Endmills
These mills are for those doing real 3D milling or 4th axis work. Due to the long cutting edges, they are very versatile. Allowing more material to be removed in a single pass| VHM BallnoseLong 1mm | € 16.99 (ex. vat) |
| VHM BallnoseLong 1,5mm | € 16.99 (ex. vat) |
| VHM BallnoseLong 2mm | € 16.99 (ex. vat) |
| VHM BallnoseLong 2,5mm | € 16.99 (ex. vat) |
| VHM BallnoseLong 3mm | € 16.99 (ex. vat) |
Breaking news
NEW Product CPU/Sensor Holder
A product which protects your USBCNC CPU, and allows easy connection of ReferenceSensor, Emergencystop, Probe and MPG Handwheel2011-09-07
New language added.
Now also available in Spanish. Ahora también disponible en español (haz click en la bandera de España).2011-06-05
New Website Launched
- New Layout of menu structures.
- Data input into the contact form is saved in your browser.
- New Slogan DamenCNC “Building Blocks in Motion Control”
We supply worldwide!
