Fresadoras
VHM-Long Ballnose Endmills
We have added this item to the webshop since we were getting many requests for extra long ballnose cutters. These cutters are used for prototyping of products where deep cuts need to be made. Not only is the cutter long, but it also has a long flute length. Which allows a deep cut on each pas. Overal this makes it a very productive tool in wood,foam and aluminium...
| VHM-Long Ballnose 3.00mm | € 23.99 (sin IVA)  |
| VHM-Long Ballnose 4.00mm | € 27.99 (sin IVA) |
| VHM-Long Ballnose 5.00mm | € 35.99 (sin IVA) |
| VHM-Long Ballnose 6.00mm | € 39.99 (sin IVA) |
| VHM-Long Ballnose 8.00mm | € 50.99 (sin IVA) |
Set of 5 Deep Reach Solid Carbide Mills for Alumin
Set of 5 Solid Carbide Mills for Aluminum&Plastics. Tool Geometry especially for Aluminum (2 flutes) and Plastics. Deap reach tools with long flute length. Intended for applications where a normal tool is not long enough...| Set of 5 Deep Reach Solid Carbide Mills for Alumin | € 59.99 (sin IVA) |
Set of 5 Solid Carbide Mills for Aluminum&Plastics
Set of 5 Solid Carbide Mills for Aluminum&Plastics, shaft size 3mm on all tools, so only one collet needed. Tool Geometry especially for Aluminum (2 flutes) and Plastics. Tip diameters starting at 1.00mm and increasing to 3.00mm with 0.5mm steps.| Set of 5 Solid Carbide Mills for Aluminum&Plastics | € 39.99 (sin IVA) |
V-groove cutter VHM
V-groove cutter made of VHM. Designed for chamfering of circuitboards, isolation routing, milling break-out edges in PCB.
Mounting shaft is always 3,175mm. The diameter and the angle of the tip can be chosen. Mosten often sold is the 30 degree and 2mm diameter tip.| 30 degree tip 2,0mm diameter | € 9.99 (sin IVA) |
Corner Radius Endmills TiAIN Coating
The tools improve productivity and reduce costs. A sharp corner of an end mill is its weakest point. The corner radius design strengthens the end mill by reducing chipping and providing longer tool life. In mold applications where ball end mills have traditionally been used, a corner radius end mill will remove more material faster, improving productivity...| 3mm Corner Radius Endmill 2Flute TiAIN Coating | € 10.99 (sin IVA) |
| DIA 5.00mm SHANK 5.00mm FL 16.0mm OAL=50mm CR=0.5mm | € 13.99 (sin IVA) |
| 6mm Corner Radius Endmill 2Flute TiAIN Coating | € 19.99 (sin IVA) |
DCNC BHP 3 40
A quality tool bit that can be used for engraving wood,plastics, and non ferro metals.| DCNC BHP 3 40 | € 6.30 (sin IVA) |
DCNC BHP 6 40
A quality tool bit that can be used for engraving wood,plastics, and non ferro metals.| DCNC BHP 6 40 | € 12.99 (sin IVA) |
DCNC Toolholder
The DCNC toolholder is similar to the kress clamps but has some improvements. After working with the kress clamps in our cnc machines we were annoyed that the toolchanges took a lot of time. This problem was first solved by adding a retaining nut for each clamp. But this meant a price of about 30EUR per tool. Further there was no way to fixate the tool length...| 8 to 4mm | € 18.91 (sin IVA) |
| 8 to 5mm | € 18.91 (sin IVA) |
| 8 to 10mm | € 18.91 (sin IVA) |
Endmills for Aluminium
These single flute endmills are especially suited for cutting aluminium. They are made from solid carbid (VHM), and are right hand cutting with a right hand spiral.
See a movie of the cutters in action on youtube.
http://www.youtube.com/watch?v=Q9lZm6AQc-g&feature=player_profilepage| 2mm Endmill for Aluminium | € 12.49 (sin IVA) |
| 2.5mm Endmill for Aluminium | € 13.49 (sin IVA) |
| 3mm Endmill for Aluminium | € 13.49 (sin IVA) |
| 4mm Endmill for Aluminium | € 15.49 (sin IVA) |
| 5mm Endmill for Aluminium | € 18.99 (sin IVA) |
| 6mm Endmill for Aluminium Short CL18mm | € 22.49 (sin IVA) |
| 6mm Endmill for Aluminium Long CL25mm | € 26.99 (sin IVA) |
| 8mm Endmill for Aluminium Short CL22mm | € 33.49 (sin IVA) |
| 8mm Endmill for Aluminium LongCL40mm | € 40.49 (sin IVA) |
| 10mm Endmill for Aluminium | € 53.99 (sin IVA) |
| 12mm Endmill for Aluminium | € 69.49 (sin IVA) |
Endmills for Plastics
Solid carbide one flute endmills for plastic, right hand cutting with left hand spiral. Especially suited for cutting all plastics, glassfibre reinforced polyesters as well as carbonfiber.| 2mm Endmill for plastics | € 12.49 (sin IVA) |
| 2,5mm Endmill for plastics | € 13.49 (sin IVA) |
| 3mm Endmill for plastics | € 13.49 (sin IVA) |
| 4mm Endmill for plastics | € 15.49 (sin IVA) |
| 5mm Endmill for plastics | € 18.99 (sin IVA) |
| 6mm short Endmill for plastics | € 22.49 (sin IVA) |
| 6mm long Endmill for plastics | € 25.99 (sin IVA) |
| 8mm short Endmill for plastics | € 33.49 (sin IVA) |
| 8mm long Endmill for plastics | € 40.49 (sin IVA) |
| 10mm Endmill for plastics | € 55.99 (sin IVA) |
| 12mm Endmill for plastics | € 70.49 (sin IVA) |
Indexable Endmills
These indexable endmills work very well in steel and also cast iron. When doing modifications to the BF20 and BF30 cast iron parts we use these cutters.The different diameter mills all use the samee insert (except the 30mm). So you only need to stock one type of inserts.| 12mm Indexable Endmill + 10 inserts+ Torxtool | € 58.78 (sin IVA) |
| 16mm Indexable Endmill + 10 inserts+ Torxtool | € 61.30 (sin IVA) |
| 20mm Indexable Endmill + 10 inserts+ Torxtool | € 64.66 (sin IVA) |
| 25mm Indexable Endmill + 10 inserts+ Torxtool | € 69.71 (sin IVA) |
| 10 x Extra Inserts Indexable Endmills 10,12,16,20,25mm | € 40.33 (sin IVA) |
| 30mm RoundDowel Indexable Endmill + 10 inserts+ Torxtool | € 41.97 (sin IVA) |
| 10 x Extra Inserts 30mm RoundDowel Indexable Endmills 30mm | € 29.37 (sin IVA) |
| 1 x Inserts for Milling Aluminium 10,12,16,20,25mm | € 10.41 (sin IVA) |
Mini End Mills, Three Flutes
These are mini endmills which work very nice with the kress and other hobby motors. The pricing is quite nice. It has some features which makes it nice for the hobbyist. It no problem to drill with this endmill for example. Another nice feature is the clamped diameter of all these mills is 6mm. So you dont need special clamps...| Mini End Mill short 1.5mm | € 7.99 (sin IVA) |
| Mini End Mill short 2mm | € 7.99 (sin IVA) |
| Mini End Mill short 2.5mm | € 7.99 (sin IVA) |
| Mini End Mill short 3mm | € 7.99 (sin IVA) |
| Mini End Mill short 3.5mm | € 7.99 (sin IVA) |
| Mini End Mill short 4mm | € 7.99 (sin IVA) |
| Mini End Mill short 4.5mm | € 7.99 (sin IVA) |
| Mini End Mill short 5mm | € 7.99 (sin IVA) |
| Mini End Mill short 5.5mm | € 7.99 (sin IVA) |
| Mini End Mill short 6mm | € 7.99 (sin IVA) |
| Mini End Mill long 2mm | € 8.99 (sin IVA) |
| Mini End Mill long 2.5mm | € 8.99 (sin IVA) |
| Mini End Mill long 3mm | € 8.99 (sin IVA) |
| Mini End Mill long 3.5mm | € 8.99 (sin IVA) |
| Mini End Mill long 4mm | € 8.99 (sin IVA) |
| Mini End Mill long 4.5mm | € 8.99 (sin IVA) |
| Mini End Mill long 5mm | € 8.99 (sin IVA) |
| Mini End Mill long 5.5mm | € 8.99 (sin IVA) |
| Mini End Mill long 6mm | € 8.99 (sin IVA) |
Mini End Mills, Two Flutes
These are the smallest end Mills that we can offer. Going down to 0.80mm. The mills have 2 flutes and a very good transport of chips. | Mini Mill 2 flutes 0.40mm | € 9.20 (sin IVA) |
| Mini Mill 2 flutes 0.50mm | € 9.20 (sin IVA) |
| Mini Mill 2 flutes 0.60mm | € 9.20 (sin IVA) |
| Mini Mill 2 flutes 0.70mm | € 9.20 (sin IVA) |
| Mini Mill 2 flutes 0.80mm | € 7.52 (sin IVA) |
| Mini Mill 2 flutes 0.90mm | € 7.52 (sin IVA) |
| Mini Mill 2 flutes 1.00mm | € 7.52 (sin IVA) |
| Mini Mill 2 flutes 1.10mm | € 7.52 (sin IVA) |
| Mini Mill 2 flutes 1.20mm | € 7.52 (sin IVA) |
| Mini Mill 2 flutes 1.30mm | € 7.52 (sin IVA) |
| Mini Mill 2 flutes 1.40mm | € 7.52 (sin IVA) |
| Mini Mill 2 flutes 1.50mm | € 7.52 (sin IVA) |
| Mini Mill 2 flutes 2.00mm : | € 7.52 (sin IVA) |
| Mini Mill 2 flutes 3.00mm | € 7.52 (sin IVA) |
VHM-Endmill-Alu-2 Flute
These two flute endmills are especially suited for cutting aluminium, plastic and copper alloys (non ferrous metals). They are made from solid carbid (VHM). | 1.00mm VHM-Endmill-Alu-2 Flute | € 12.99 (sin IVA) |
| 1.50mm VHM-Endmill-Alu-2 Flute | € 12.99 (sin IVA) |
| 2.00mm VHM-Endmill-Alu-2 Flute | € 11.49 (sin IVA) |
| 2.50mm VHM-Endmill-Alu-2 Flute | € 11.49 (sin IVA) |
| 3.00mm VHM-Endmill-Alu-2 Flute | € 10.99 (sin IVA) |
| 4.00mm VHM-Endmill-Alu-2 Flute | € 12.99 (sin IVA) |
| 5.00mm VHM-Endmill-Alu-2 Flute | € 15.49 (sin IVA) |
| 6.00mm VHM-Endmill-Alu-2 Flute | € 18.99 (sin IVA) |
| 8.00mm VHM-Endmill-Alu-2 Flute | € 26.99 (sin IVA) |
| 10.00mm VHM-Endmill-Alu-2 Flute | € 40.49 (sin IVA) |
| 12.00mm VHM-Endmill-Alu-2 Flute | € 53.99 (sin IVA) |
| 14.00mm VHM-Endmill-Alu-2 Flute | € 76.49 (sin IVA) |
| 16.00mm VHM-Endmill-Alu-2 Flute | € 103.49 (sin IVA) |
| 18.00mm VHM-Endmill-Alu-2 Flute | € 134.99 (sin IVA) |
| 20.00mm VHM-Endmill-Alu-2 Flute | € 179.99 (sin IVA) |
VHM-Mini-Ballnose Endmills
These mills are for those doing real 3D milling or 4th axis work. Due to the long cutting edges, they are very versatile. Allowing more material to be removed in a single pass| VHM BallnoseLong 1mm | € 16.99 (sin IVA) |
| VHM BallnoseLong 1,5mm | € 16.99 (sin IVA) |
| VHM BallnoseLong 2mm | € 16.99 (sin IVA) |
| VHM BallnoseLong 2,5mm | € 16.99 (sin IVA) |
| VHM BallnoseLong 3mm | € 16.99 (sin IVA) |
Extra long mill with relieved shaft
Solid carbide mill with extra-long and relieved shaft. The diameter of the relieved part of the shaft is smaller than the tool tip and the rest of the shaft, so the shaft won’t touch the material when milling.| Extra long mill with relieved shaft 8.00mm | € 64.99 (sin IVA) |
Últimas noticias
NUEVO PRODUCTO 4.0NM NEMA 34 del motor
Una alternativa a bajo costo el motor de 4,5 nm, que ya teníamos.2011-11-13
Producto NUEVO CPU / Sensor Holder
Un producto que protege la CPU USBCNC, y permite una fácil conexión de sensor de referencia, parada de emergencia, la sonda y el volante MPG2011-09-07
Versión española del sitio web de DamenCNC
Ahora también disponible en español.
¡Envío al mundo entero!
