Drivers paso a paso
HP 4015 1,5A 40V driver 1/64 microstep
The 4015 is a very small size high performance microstepping drive based on one of the most advanced technologies in the world today. It's suitable for driving any 2-phase and 4-phase hybrid stepping motors. By using advanced bipolar constant-current chopping technique, it can output more speed and power from the same motor, compared with traditional drives such as L/R drives...
| Single Unit | € 29.99 (sin IVA)  |
HP 5042 4,2A 50V driver 1/128 microstep
This driver comes tested and assembled. Is great for the intermediate applications, driving motors up to 2nm. The most common use if for making routers. The driver is compatible with USBCNC, giving a very reliable and powerful system. Its also possible to use the driver with the interface kit offered in electronic parts...| Single Unit | € 54.61 (sin IVA) |
| Set of three | € 147.02 (sin IVA) |
| Set of four | € 193.24 (sin IVA) |
HP 5056 5,6A 50V driver 1/128 microstep
This driver comes tested and assembled. Is great for the bigger applications. Converting a large lathe like an AI or a bridgeport mill is not uncommon for these drivers. The driver can be connected to the interface kit offered in electronic parts. Combination with 2amp and 4amp drivers is possible.| Single Unit HP5056 | € 63.03 (sin IVA) |
| Set of 3 HP5056 Drivers | € 180.67 (sin IVA) |
| Set of 4 HP5056 Drivers | € 239.50 (sin IVA) |
HP 8078 7,8A 80V driver 1/256 microstep
This driver comes tested and assembled. Is great for the bigger applications. Converting a large lathe like an AI or a bridgeport mill is not uncommon for these drivers. The driver can be connected to the interface kit offered in electronic parts. Combination with 2amp and 4amp drivers is possible.| Single Unit | € 89.99 (sin IVA) |
| Set of 3 | € 251.99 (sin IVA) |
| Set of 4 | € 335.99 (sin IVA) |
| HP 8078 L (new model) | € 89.99 (sin IVA) |
VAC_220_78
This driver is the best performing stepper driver we can offer. Since it can operate up to 230V, the steppermotors will be able to run at very high velocity, giving very good performane, with NEMA 34 motors. Its recommended for large lathe and mill conversions.| VAC_220_78 Single Unit | € 172.26 (sin IVA) |
| VAC_220_78 Three Units | € 504.19 (sin IVA) |
| VAC_220_78 Four Units | € 668.90 (sin IVA) |
HP 6083 8,3A 60V driver 1/128 microstep
The 6083 is our only driver suitable for driving three-phase steppermotors.
This driver is compatible with USBCNC, giving a very reliable and powerful system. It’s also possible to use the driver with the interface kit offered in electronic parts (compatible with Mach 3 and other LPT based programs)...| HP6083 Single Unit | € 81.00 (sin IVA) |
Últimas noticias
NUEVO PRODUCTO 4.0NM NEMA 34 del motor
Una alternativa a bajo costo el motor de 4,5 nm, que ya teníamos.2011-11-13
Producto NUEVO CPU / Sensor Holder
Un producto que protege la CPU USBCNC, y permite una fácil conexión de sensor de referencia, parada de emergencia, la sonda y el volante MPG2011-09-07
Versión española del sitio web de DamenCNC
Ahora también disponible en español.
¡Envío al mundo entero!
