ITEM
16X160
This profile is often used for constructing machine beds. It has four 8mm slots and three 5mm slots. T slot nuts are available for easy mounting of products.
40x120 L
40x160 L
80x160 L
T-Nut
T-nut to connect profiles to each other. Or to connect other items such as the drylin linear slides.| T-NUT M4 | € 0.84 (sin IVA)  |
| T-NUT M5 | € 0.84 (sin IVA) |
| T-NUT M6 | € 0.84 (sin IVA) |
| T-NUT M8 | € 0.84 (sin IVA) |
90 Degree Profile Connector
| L=40mm | € 5.99 (sin IVA) |
| L=80mm | € 5.99 (sin IVA) |
45 Degree Angle Connector
The is a new type of angle connector that allows profiles to be connected under a 45 degree angle. Such a connection could also be made by cutting the profile under a 45 degree angle. In practice this is quite a difficult procedure. Using this part the cuts can be made straight, and the connection is easy...| 40mm width | € 9.99 (sin IVA) |
90degree angle connector
With these connector it making 90 degree connections is very easy. The part is cast aluminium and very sturdy. These units are only compatible with ITEM profiles. The nuts and bolts for mounting are included.| 40x40 90 degree connector | € 5.84 (sin IVA) |
| 80x80x38width 90 degree connector | € 10.50 (sin IVA) |
Drill Jigs
Drilling holes in the aluminum profiles can be quite tough when you don't have the right equipment. We have made some drilling jigs that will help you. At the moment we only have the JIG for item profiles. | ITEM Drill JIG (JIG + Clamp + Drill 7,5mm) | € 34.99 (sin IVA) |
| ITEM Drill JIG (JIG + Clamp + Drill 14mm) | € 39.99 (sin IVA) |
Handle Aluminium Black
| Handle Aluminium Black 120mm Straight | € 4.45 (sin IVA) |
| Handle Aluminium Black 120mm Angle | € 6.13 (sin IVA) |
ITEM Plastic End Plates
To nicely finish your machine, add these End Plates to your profiles. It add a professional look to your machine, at a small extra cost.| 16x160 EndPlate | € 2.09 (sin IVA) |
| 40x40 EndPlate | € 0.83 (sin IVA) |
| 40x80 EndPlate | € 1.25 (sin IVA) |
| 40x120 EndPlate | € 3.32 (sin IVA) |
| 40x160 EndPlate | € 5.00 (sin IVA) |
| 80x80 EndPlate | € 2.14 (sin IVA) |
| 80x120 EndPlate | € 6.68 (sin IVA) |
| 80x160 EndPlate | € 8.24 (sin IVA) |
DCNC Shearplates
These shear plates can be used to make connections that are stronger than the standard 90 degrees connectors. The sets include the plates plus all nuts and bolts. Further it also allows 180degrees angles to be made. Some examples are included in the manual, but the options are endless. If you need a type of connector that is not offered, send you proposal and we can make it for you...| DCNC-Shearplate 90-4040 | € 9.66 (sin IVA) |
| DCNC-Shearplate 90-8080 | € 14.71 (sin IVA) |
| DCNC-Shearplate 180-4040 | € 12.18 (sin IVA) |
| DCNC-Shearplate 180-8080 | € 18.07 (sin IVA) |
| DCNC-Angleplate 80-160 | € 10.50 (sin IVA) |
| DCNC-Topplate 80x80- 40 | € 13.87 (sin IVA) |
Hinge Sturdy Cast Alu type
| Hinge Sturdy Cast Alu type | € 8.39 (sin IVA) |
ITEM Threaded End Plates
These sturdy aluminium end plates can be mounted to the end of the ITEM structural profiles. They will fit the 40x80(L) and 80x80(L)profiles. Thread size ranging from m10 to m20.
The most common use is to mount feet under machines and structures, so easy adjustments can be made to level out the machines. They can also be used to mount wheels under a structure to make it mobile...| Endplate 40x80 M16 | € 11.93 (sin IVA) |
| Endplate 80x80 M12 | € 15.29 (sin IVA) |
| Endplate 80x80 M16 | € 15.29 (sin IVA) |
| Endplate 80x80 M20 | € 15.29 (sin IVA) |
Últimas noticias
NUEVO PRODUCTO 4.0NM NEMA 34 del motor
Una alternativa a bajo costo el motor de 4,5 nm, que ya teníamos.2011-11-13
Producto NUEVO CPU / Sensor Holder
Un producto que protege la CPU USBCNC, y permite una fácil conexión de sensor de referencia, parada de emergencia, la sonda y el volante MPG2011-09-07
Versión española del sitio web de DamenCNC
Ahora también disponible en español.
¡Envío al mundo entero!
