Conectadores
SUB-D Connector PCB (thinpin) type
We use this type of SUB-D connector when we wish to mount the SUB-D connector in/on a PCB. Its a special model with thin pins designed for PCB mounting
| SUB-D Print 9P FEMALE | € 1.99 (sin IVA)  |
| SUB-D Print 25P MALE | € 1.99 (sin IVA) |
| SUB-D Print 25P FEMALE | € 1.99 (sin IVA) |
5 pole connector & bus +wiring
This is the type of connector we use in our RTR sets. Its a quality connector that has some nice features. No soldering is required since its a screw connector. The bus has been prewired with 40CM of wire. Its possible to fixate the connector to the bus with locking screws. We can offer these directly from our stock...| 5PoleConnector&PrewiredBus | € 6.68 (sin IVA) |
5 Pole DIN Bus
5 pole, nickelplated,contacts silverplated,reliable contact. This bus accompanies DIN connector.| Price for each. | € 1.19 (sin IVA) |
5 Pole DIN connectors
5 pole, nickelplated, contacts silverplated, reliable contact.| Price for each. | € 1.55 (sin IVA) |
5 Pole DIN secured BUS
5 Pole DIN BUS secured. A high quality connector. Which is easier to solder than the 5 Pole DIN BUS. Further the connector can be secured with thread.| 5 Pole DIN secured BUS MALE | € 5.71 (sin IVA) |
5 Pole DIN secured connector
5 Pole DIN secured connector. A high quality connector. Which is easier to solder than the 5 Pole DIN Connector. Further it can be secured to the bus with thread. | 5 Pole DIN secured connector FEMALE | € 7.99 (sin IVA) |
Heavy Duty Circular Connectors
These connectors are for rough environment. We prefer these connectors because they are very robust. A big plus point is that for (3+PE) its a screw connector, which saves a lot of soldering time.| 3+PE Cable Female | € 5.49 (sin IVA) |
| 3+PE Cable Male | € 5.49 (sin IVA) |
| 3+PE Chassis Female | € 4.49 (sin IVA) |
| 3+PE Chassis Male | € 4.49 (sin IVA) |
IPS Cable Connector (ScrewType)
These connectors are compatibele with our plug and play sensor system that is used in the RTR sets. This connector is intended for those who which to connect other sensors than we supply, or to make custom cable lengths. The connectors are high quality screw type connectors, which makes the connection quite easy...| M12_Straight_Male | € 7.10 (sin IVA) |
| M12_Straight_Female | € 7.10 (sin IVA) |
| M12_90DegreeAngle_Male | € 7.10 (sin IVA) |
| M12_90DegreeAngle_Female | € 7.10 (sin IVA) |
IPS_Panel_Connectors
A panel connector that is compatible with our pluggable sensor system. We use the same connector in our RTR systems.
Its a very robust connector, that can also be locked in place.| M12_Female RKHL 4/S 5.5 | € 5.59 (sin IVA) |
| M12 Male RSHL 4/S 5.5 | € 7.99 (sin IVA) |
PluggableConnector + PCBmount
We use these components a lot in our electronic assemblies. Many request have come in from clients building their own systems that would like to use these simple and robust connectors. So they have been added to product range. We can also offer other sizes on request, leadtime will be longer.| 5 Pole (pitch 5.08mm) | € 2.51 (sin IVA) |
| 10 Pole (pitch 5.08mm) | € 4.19 (sin IVA) |
| 10 Pole (pitch 5.08mm) 90 degree angle | € 4.19 (sin IVA) |
Ribbon Cable + Connectors
10 Pole ribbon cable is used to connect the Steppermotor drivers to the USBCNC or Mach 3 interface.
26 Pole ribbon cable is used to make LPT poort connections for Mach 3 systems.| 10 Pole Ribbon Cable 1 Meter | € 1.05 (sin IVA) |
| 26 Pole Ribbon Cable 1 Meter | € 2.31 (sin IVA) |
| 10 Pole Ribbon Connector | € 0.38 (sin IVA) |
| 26 Pole Ribbon Connector | € 0.52 (sin IVA) |
| 10 Pole Male 90 degree PCB Header | € 0.46 (sin IVA) |
| 10 PoleRibbon to 9 pole SUB-D connector FEMALE | € 1.42 (sin IVA) |
| 26 PoleRibbon to 25 pole SUB-D connector FEMALE | € 1.67 (sin IVA) |
| 10 PoleRibbon to 9 pole SUB-D connector MALE | € 1.42 (sin IVA) |
| 26 PoleRibbon to 25 pole SUB-D connector MALE | € 1.67 (sin IVA) |
Sub-D Covers
A cover that can be used in combination with Sub-D connectors. Please note, it will not work in combination with ribbon to SUB-D connectors.| 9 Pole | € 1.42 (sin IVA) |
| 25 Pole | € 1.42 (sin IVA) |
Sub-D Mount Screw Set
The Sub-D mounts on the back of your PC and those used in our controllers dont have metric but UNC thread. When building housings its important to use the correct UNC bolts otherwise the thread will be damaged. Here we offer a set of 2 bolts,nuts,rings, in the correct 4-40 UNC thread.| One Set | € 0.83 (sin IVA) |
Últimas noticias
NUEVO PRODUCTO 4.0NM NEMA 34 del motor
Una alternativa a bajo costo el motor de 4,5 nm, que ya teníamos.2011-11-13
Producto NUEVO CPU / Sensor Holder
Un producto que protege la CPU USBCNC, y permite una fácil conexión de sensor de referencia, parada de emergencia, la sonda y el volante MPG2011-09-07
Versión española del sitio web de DamenCNC
Ahora también disponible en español.
¡Envío al mundo entero!
