Husillos ISEL
16mm Ballscrews No End Machining
What is offered is just the bare ballscrew. No end machining included. When ordering take into account that above 1.5 meters shipping is difficult and more expensive than what is quoted on the website. The maximum length is 3meters, but that would need to be picked up at our shop.
If you would like also end machining...
DCNC BearingBlock for 16mm Ballscrew
Fixed bearing which can be used in combination with ISEL 16mm Ballscrews. It can take axial and radial loads. It has been designed such that it can be easily combined with ITEM Profiles, it has 40mm hole spacing. Also it can be mounted in vertical or horizontal manner. The bearing can be enclosed with the included retaining ring, or when using a NEMA 23 or 34 adapter, its enclosed by this adapter...| DCNC BearingBlock for 16mm Ballscrew | € 45.99 (sin IVA)  |
DCNC Floating BearingBlock for 16mm ISEL Spindel
A very compact floating bearing. This product has been designed for use in our Linear Slide modules. Due to the fact the component is so compactly built, we can slide our slideplate over the bearing. Which means we can use a shorter ballscrew, and make a compacter machine. Please note, the product is only intended to be used as a floating bearing...| DCNC Floating BearingBlock for 16mm ISEL Spindel | € 19.99 (sin IVA) |
16mm CNC End Machining
We can do the end machining of ballscrew since we have a CNC lathe in our shop.
The best option is to go for the 2 Sided ISEL standard CNC machining. The spindel wil then fit into all the parts bearing etc we sell.
Its also possible to have a custom spindel made. The price give assumes m10x0,75mm thread is used and the maximum machining length is 70mm. For other machining the price can alter...| 16mm 2 Sided ISEL standard CNC machining | € 54.58 (sin IVA) |
| Custom Machining " Provide dimension, price pending" | € 79.79 (sin IVA) |
16mm Ballnut Accessories
These are extra items that you could need in combination with the 16mm Ballscrews. The bearingblocks can be used to build lineair motion modules. Futher an item like the m10x0,75 nut is needed for each spindel. Also the wrench you will need to be able to tighten the nut.| Wiper (set of 2 pieces) 213500 0001 | € 7.52 (sin IVA) |
| 16mm SpannBlock 1 " Square Flange" 213500 | € 27.72 (sin IVA) |
| 16mm SpannBlock 2 "Round Flange" 213501 | € 46.93 (sin IVA) |
| M10x0.75mm locking nut | € 4.16 (sin IVA) |
| Wrench for M10x0,75 locking nut | € 8.36 (sin IVA) |
16mm Ballnuts Variant 1A
A very compact and simple type of ballnut. Please not there is no way to keep dust out. So your machines needs something else to protect spindel from dust. Often the Variant 2 is the better choice. We use this nut only when space is tight.| 16mm Variant 1A pitch 4mm 2130021000 | € 62.98 (sin IVA) |
| 16mm Variant 1A pitch 5mm 2130011000 | € 62.98 (sin IVA) |
16mm Ballnuts Variant 2
This is the type of ballnut we like to use in our own projects. Due to the rectangular shape its easy to mount. further its possible to mount wipers to keep dust out of the ballnut. | 16mm Variant 2 pitch 2,5mm 2130031003 | € 77.99 (sin IVA) |
| 16mm Variant 2 pitch 4 mm 2130031004 | € 77.99 (sin IVA) |
| 16mm Variant 2 pitch 5 mm 2130031005 | € 77.99 (sin IVA) |
| 16mm Variant 2 pitch 10 mm 2130031010 | € 77.99 (sin IVA) |
| Umlenkteil P2,5 mm | € 4.99 (sin IVA) |
| Umlenkteil P4 mm | € 4.99 (sin IVA) |
16mm Ballnuts Variant 3
The Variant 3 ballnut is a tricky one. As a client you need to keep in mind that you need the mountingblocks Spannblock 1 or 2 to mount it in. Or you could make your own. Anyway without the block there is no pretension on the nut and thus it cant be used. The nice thing is that you can also mount wipers in this nut to keep dirt out further its the only ballnut available in all pitches...| 16mm Variant 3 pitch 2,5mm 213503 | € 67.22 (sin IVA) |
| 16mm Variant 3 pitch 4 mm 213514 | € 67.22 (sin IVA) |
| 16mm Variant 3 pitch 5 mm 213505 | € 67.22 (sin IVA) |
| 16mm Variant 3 pitch 10 mm 213510 | € 67.22 (sin IVA) |
| 16mm Variant 3 pitch 20 mm 213520 | € 67.22 (sin IVA) |
25mm Ballscrews No End machining
What is offered is just the bare ballscrew. No end machining included. When ordering take into account that above 1.5 meters shipping is difficult and more expensive than what is quoted on the website. The maximum length is 3meters, but that would need to be picked up at our shop. If you would like also end machining...25mm CNC machining of ends
| Standard DamenCNC 2 sided machining | € 60.46 (sin IVA) |
| Custom CNC machining | € 79.79 (sin IVA) |
25mm Ballnut Accessories
These are extra items that you could need in combination with the 25mm Ballscrews. The bearingblocks can be used to build lineair motion modules. Further an item like the m17x1 nut is needed for each spindel. Also the wrench you will need to be able to tighten the nut. Please note with the 25mm spindel the use of a Spannblock is required...| Wiper (set of 2 pieces) 213500 0001 | € 8.99 (sin IVA) |
| 25mm 5/10mm pitch SpannBlock 1 " Square Flange" 213700 90 | € 60.50 (sin IVA) |
| 25mm 20mm pitch SpannBlock 1 " Square Flange" 213700 90 | € 58.82 (sin IVA) |
| 25mm 5/10mm pitch SpannBlock 2 "Round Flange" 213 700 90 | € 54.99 (sin IVA) |
| 25mm 20mm pitch SpannBlock 2 "Round Flange" 213 700 9 | € 75.62 (sin IVA) |
| m17x1 Locking Nut | € 5.00 (sin IVA) |
| Wrench for m17x1 Locking nut | € 9.20 (sin IVA) |
| m12x1 Locking Nut | € 5.00 (sin IVA) |
| m20x1 Locking Nut | € 5.00 (sin IVA) |
25mm Ballnuts Variant 3
For the 25mm Ballscrew system ISEL only has the Variant 3 type of nut. It needs to be used in combination with the MountingBlocks. Since these provide the pre tension on the system. 5mm/10mm and 20mm pitch is available, use the higher pitches for longer spindels, this will allow the rpm of the spindel to be less as the same feedrate...| 25mm Variant 3 pitch 5mm 213 700 0005 | € 84.99 (sin IVA) |
| 25mm Variant 3 pitch 10mm 213 700 0010 | € 93.99 (sin IVA) |
| 25mm Variant 3 pitch 20mm 213 700 0020 | € 93.99 (sin IVA) |
Últimas noticias
NUEVO PRODUCTO 4.0NM NEMA 34 del motor
Una alternativa a bajo costo el motor de 4,5 nm, que ya teníamos.2011-11-13
Producto NUEVO CPU / Sensor Holder
Un producto que protege la CPU USBCNC, y permite una fácil conexión de sensor de referencia, parada de emergencia, la sonda y el volante MPG2011-09-07
Versión española del sitio web de DamenCNC
Ahora también disponible en español.
¡Envío al mundo entero!
