Accesorios para USBCNC en general
10 Pole Ribbon -->> screw terminal interface
The USBCNC interfaces have ribbon cable connectors. These work very well with all our plug and play devices. But sometimes a custom connection needs to be made. Then this ribbon to screw terminal interface is a great product. It makes the wiring a lot easier.
| 10 Pole Ribbon -->> screw terminal interface | € 9.99 (sin IVA)  |
10 Pole Ribbon -->> Signal Multiplier
The USBCNC interfaces have ribbon cable connectors. These work very well with all our plug and play devices. But sometimes one of the outputs on the USBCNC board needs to be used multiple times. In that case this signal multiplier is a nice product. It allows one ribbon cable connection to be duplicated 3 times...| 10 Pole Ribbon -->> Signal Multiplier | € 9.99 (sin IVA) |
CPU/Sensor Holder
This is a product that has been developed for our RTR CNC controllers. It’s a device that protects the inputs of the USBCNC CPU (4&5b) and allows sensors of almost any type to be easily connected, using industry standard m12 sensor connectors. When a short circuit is made or if an incorrect voltage is attached, only the optocoupler will be broken...| CPU/Sensor Holder | € 139.99 (sin IVA) |
MPG Handwheel
This is one of the most handy add-ons we sell for USBCNC. Since we have got so many positive responses to the product we include it as a standard item when we supply the Performance version of our Ready to Run set. The product can be used in 2 sections of the software. It was intended for use to jog the machine, when you enter the jog menu of the USBCNC software (shortkeys f12,f9,f9)...| MPG Handwheel | € 169.99 (sin IVA) |
RTR Relays module (Tool Flood)
We use this module in all our RTR controllers. It has two 230V solid state relays. These relays are most often used used to switch a KRESS milling motor(Tool) and a coolant pump(Flood). The module interfaces with USBCNC CPU V4 or V5, via a ribbon cable. On the PCB there are 2 jumpers allowing you to choose which signal from USBCNC controls the relays...| RTR Relays module (Tool Flood) | € 69.99 (sin IVA) |
CPU V3 & V4 & V5b Hardware Extra's
These parts are plug and play with USBCNC. They are designed in such a manner that they will work with both CPU v3.0 and CU v4.0.| 0-10V Output Spindle Speed Control | € 69.99 (sin IVA) |
| 5042&5056 Compatibilty PCB | € 4.99 (sin IVA) |
| 8078 Compatibilty PCB | € 4.99 (sin IVA) |
Últimas noticias
NUEVO PRODUCTO 4.0NM NEMA 34 del motor
Una alternativa a bajo costo el motor de 4,5 nm, que ya teníamos.2011-11-13
Producto NUEVO CPU / Sensor Holder
Un producto que protege la CPU USBCNC, y permite una fácil conexión de sensor de referencia, parada de emergencia, la sonda y el volante MPG2011-09-07
Versión española del sitio web de DamenCNC
Ahora también disponible en español.
¡Envío al mundo entero!
