DamenCNC.com - KRESS Fraiseuses

Home > Des outils > KRESS >

KRESS Fraiseuses

Kress FME 1050

It has more features than the 800 version, and still includes an 8mm clamp. Further it is available from stock.

Kress FME 1050 (220VAC)	€ 125.99 (sans TVA)
Kress FME 1050-1 5000/25000 RPM (220VAC)	€ 134.99 (sans TVA)
Kress 6m Mains Cable Patented Quick Action Lock	€ 15.99 (sans TVA)

Kress FME 800

It has more features than the 500 version, but still includes an 8mm clamp.

Click for more information...

Single Unit	€ 109.20 (sans TVA)
Kress FME 800 110V USA version	€ 116.80 (sans TVA)

Kress Collet + Clamping Nut (530FM, 800FME, 1050(1)FME)

Bagues originales de Kress dans plusieurs tailles. Inclus avec la bague est un écrou de bague. Indiqué pour 530 FM, 800FME, 1050FME et 1050-1 FME.

Click for more information...

2.00 mm	€ 21.99 (sans TVA)
3/32 Inch (2.38mm)	€ 21.99 (sans TVA)
3.00 mm	€ 17.99 (sans TVA)
1/8inch (3.175mm)	€ 17.99 (sans TVA)
4.00 mm	€ 17.99 (sans TVA)
5.00 mm	€ 21.99 (sans TVA)
6.00 mm	€ 17.99 (sans TVA)
1/4 inch (6.35mm)	€ 17.99 (sans TVA)
8.00 mm	€ 17.99 (sans TVA)

Kress-Mounting Block

This block can be used to mount the kress motor to a Z axis or other fixture. The block is constructed from 20mm thick aluminium which makes it a sturdy attachment.

Click for more information...

Kress_Mounting_Block_V2.0_(80x80x20mm)

€ 28.15 (sans TVA)

Colinbus Profiler Add-Ons

The colinbus profiler is a small DIY build cnc router. The standard included milling motor is the weak link in the design. However replacing it by a much better kress motor cannot be done directly without changing some parts on the machine. The parts offered in this section of the site will make the kress directly compatible with the machine...

Click for more information...

Colinbus Kress + Vacuum fixture	€ 29.99 (sans TVA)
Colinbus improved Vertical mount	€ 15.99 (sans TVA)
ProfilerPro improved Vertical mount	€ 23.99 (sans TVA)
Adapter Kress_RS1400 to Profiler Vacuumfixture	€ 9.99 (sans TVA)

KRESS Wrench 17mm

From factory the KRESS milling motors do not come with a wrench to tighthen the locking nut. We have made this very simple tool ourselves, since many clienst are requesting it. The Wrench is 3mm thin, and will fit perfectly unlike normal wrenches which are thick, and can get caught between tooling and the clamping nut...

Click for more information...

KRESS Wrench 17mm

€ 8.99 (sans TVA)

Kress Flexible Shaft

L'axe flexible s'applique de faà§on optimale pour ébavurer, nettoyant et le polissage des endroits étroits et inaccessibles cet axe flexible est qualité industrielle, très vigoureuse.

Click for more information...

Kress Flexible Shaft	€ 184.99 (sans TVA)
Kress Table Holding Device	€ 36.99 (sans TVA)
FlexShaft 6,35mm Collet	€ 18.99 (sans TVA)
FlexShaft 8,00mm Collet	€ 18.99 (sans TVA)

Kress Spare Clamping Nut

Extra clamping nut. To save time with tool changes some people have clamping nut for each clamp.

Click for more information...

Kress Clamping Nut

€ 8.49 (sans TVA)

Kress Spare Brushes 800/1050FME(1)

A set of spare brushes for when the ones one your milling motor have worn out. The kress brushes have an automatic shut off function to prevent damage to the motor when brushes are worn.

Click for more information...

Pair (left and right)

€ 5.80 (sans TVA)

Kress Spare MagneticRing FME800/1050/1050-1

Les moteurs KRESS sont très fiables, et quand ils ne les correctifs sont bon marché. Si votre moteur est en marche erraticly Kress. Remplacement de l'anneau magnétique pourrait être la solution

Click for more information...

Kress Spare MagneticRing_FME800/1050/1050-1

€ 2.49 (sans TVA)

Kress Spare MainShaft

Un arbre principal disponible pour les kress 530/800/1050. Mais n'est pas ce pour ce que nous l'employons :). Il le plus souvent est vendu sous le nom de support d'outil, pour les machines qui ont ER25 ou plus grandes bagues...

Click for more information...