Fraises
VHM-Long Ballnose Endmills
We have added this item to the webshop since we were getting many requests for extra long ballnose cutters. These cutters are used for prototyping of products where deep cuts need to be made. Not only is the cutter long, but it also has a long flute length. Which allows a deep cut on each pas. Overal this makes it a very productive tool in wood,foam and aluminium...
| VHM-Long Ballnose 3.00mm | € 23.99 (sans TVA)  |
| VHM-Long Ballnose 4.00mm | € 27.99 (sans TVA) |
| VHM-Long Ballnose 5.00mm | € 35.99 (sans TVA) |
| VHM-Long Ballnose 6.00mm | € 39.99 (sans TVA) |
| VHM-Long Ballnose 8.00mm | € 50.99 (sans TVA) |
Set of 5 Deep Reach Solid Carbide Mills for Alumin
Ensemble de 5 Mills en carbure monobloc en aluminium et plastiques pour. Géométrie d'outil particulier pour l'aluminium (2 flûtes) et des matières plastiques. Deap atteindre des outils avec une longueur longue flûte. Destiné aux applications où un outil normal n'est pas assez long...| Set of 5 Deep Reach Solid Carbide Mills for Alumin | € 59.99 (sans TVA) |
Set of 5 Solid Carbide Mills for Aluminum&Plastics
Ensemble de 5 Mills en carbure monobloc en aluminium et plastiques pour, 3mm dimension de l'arbre sur tous les outils, donc une seule pince nécessaires. Géométrie d'outil particulier pour l'aluminium (2 flûtes) et des matières plastiques. Astuce diamètres à partir de 1.00mm à 3.00mm et l'augmentation des pas de 0,5 mm...| Set of 5 Solid Carbide Mills for Aluminum&Plastics | € 39.99 (sans TVA) |
V-groove cutter VHM
Rainure en V coupe en carbure monobloc. Conçu pour le chanfreinage des circuits, l'isolement de routage, de fraisage de bords PCB en petits groupes.
Montage diamètre de l'arbre est toujours 3,175 mm, de sorte qu'un seul type de pince est nécessaire. Le diamètre et l'angle du point peut être sélectionnée. Meilleures ventes c'est 30 degrés et 2 mm de diamètre pointe...| 30 degree tip 2,0mm diameter | € 9.99 (sans TVA) |
Corner Radius Endmills TiAIN Coating
Les outils améliorent la productivité et réduisent des coà»ts. Un coin pointu d'une fraise en bout est son point plus faible. La conception faisante le coin de rayon renforce la fraise en bout en réduisant ébrécher et fournir la plus longue vie d'outil...| 3mm Corner Radius Endmill 2Flute TiAIN Coating | € 10.99 (sans TVA) |
| DIA 5.00mm SHANK 5.00mm FL 16.0mm OAL=50mm CR=0.5mm | € 13.99 (sans TVA) |
| 6mm Corner Radius Endmill 2Flute TiAIN Coating | € 19.99 (sans TVA) |
DCNC BHP 3 40
A quality tool bit that can be used for engraving wood,plastics, and non ferro metals.| DCNC BHP 3 40 | € 6.30 (sans TVA) |
DCNC BHP 6 40
A quality tool bit that can be used for engraving wood,plastics, and non ferro metals.| DCNC BHP 6 40 | € 12.99 (sans TVA) |
DCNC Toolholder
The DCNC toolholder is similar to the kress clamps but has some improvements. After working with the kress clamps in our cnc machines we were annoyed that the toolchanges took a lot of time. This problem was first solved by adding a retaining nut for each clamp. But this meant a price of about 30EUR per tool. Further there was no way to fixate the tool length...| 8 to 4mm | € 18.91 (sans TVA) |
| 8 to 5mm | € 18.91 (sans TVA) |
| 8 to 10mm | € 18.91 (sans TVA) |
Endmills for Aluminium
Ces endmills simples de cannelure appropri€Â© particulièrement à l'aluminium de d€Â©coupage. Ils sont faits à partir du carbid plein (VHM), et sont le d€Â©coupage droit avec une spirale droite
http://www.youtube.com/watch?v=Q9lZm6AQc-g&feature=player_profilepage| 2mm Endmill for Aluminium | € 12.49 (sans TVA) |
| 2.5mm Endmill for Aluminium | € 13.49 (sans TVA) |
| 3mm Endmill for Aluminium | € 13.49 (sans TVA) |
| 4mm Endmill for Aluminium | € 15.49 (sans TVA) |
| 5mm Endmill for Aluminium | € 18.99 (sans TVA) |
| 6mm Endmill for Aluminium Short CL18mm | € 22.49 (sans TVA) |
| 6mm Endmill for Aluminium Long CL25mm | € 26.99 (sans TVA) |
| 8mm Endmill for Aluminium Short CL22mm | € 33.49 (sans TVA) |
| 8mm Endmill for Aluminium LongCL40mm | € 40.49 (sans TVA) |
| 10mm Endmill for Aluminium | € 53.99 (sans TVA) |
| 12mm Endmill for Aluminium | € 69.49 (sans TVA) |
Endmills for Plastics
Solid carbide one flute endmills for plastic, right hand cutting with left hand spiral. Especially suited for cutting all plastics, glassfibre reinforced polyesters as well as carbonfiber.| 2mm Endmill for plastics | € 12.49 (sans TVA) |
| 2,5mm Endmill for plastics | € 13.49 (sans TVA) |
| 3mm Endmill for plastics | € 13.49 (sans TVA) |
| 4mm Endmill for plastics | € 15.49 (sans TVA) |
| 5mm Endmill for plastics | € 18.99 (sans TVA) |
| 6mm short Endmill for plastics | € 22.49 (sans TVA) |
| 6mm long Endmill for plastics | € 25.99 (sans TVA) |
| 8mm short Endmill for plastics | € 33.49 (sans TVA) |
| 8mm long Endmill for plastics | € 40.49 (sans TVA) |
| 10mm Endmill for plastics | € 55.99 (sans TVA) |
| 12mm Endmill for plastics | € 70.49 (sans TVA) |
Indexable Endmills
Ces endmills indexables fonctionnent très bien en acier et également fer de fonte. En faire des modifications aux pièces de fer de fonte BF20 et BF30 nous utilisons ces coupeurs. Le diamètre différent fraise toute l'utilisation l'insertion de samee (excepté les 30mm). Ainsi vous devez seulement stocker un type d'insertions...| 12mm Indexable Endmill + 10 inserts+ Torxtool | € 58.78 (sans TVA) |
| 16mm Indexable Endmill + 10 inserts+ Torxtool | € 61.30 (sans TVA) |
| 20mm Indexable Endmill + 10 inserts+ Torxtool | € 64.66 (sans TVA) |
| 25mm Indexable Endmill + 10 inserts+ Torxtool | € 69.71 (sans TVA) |
| 10 x Extra Inserts Indexable Endmills 10,12,16,20,25mm | € 40.33 (sans TVA) |
| 30mm RoundDowel Indexable Endmill + 10 inserts+ Torxtool | € 41.97 (sans TVA) |
| 10 x Extra Inserts 30mm RoundDowel Indexable Endmills 30mm | € 29.37 (sans TVA) |
| 1 x Inserts for Milling Aluminium 10,12,16,20,25mm | € 10.41 (sans TVA) |
Mini End Mills, Three Flutes
These are mini endmills which work very nice with the kress and other hobby motors. The pricing is quite nice. It has some features which makes it nice for the hobbyist. It no problem to drill with this endmill for example.Another nice feature is the clamped diameter of all these mills is 6mm. So you dont need special clamps...| Mini End Mill short 1.5mm | € 7.99 (sans TVA) |
| Mini End Mill short 2mm | € 7.99 (sans TVA) |
| Mini End Mill short 2.5mm | € 7.99 (sans TVA) |
| Mini End Mill short 3mm | € 7.99 (sans TVA) |
| Mini End Mill short 3.5mm | € 7.99 (sans TVA) |
| Mini End Mill short 4mm | € 7.99 (sans TVA) |
| Mini End Mill short 4.5mm | € 7.99 (sans TVA) |
| Mini End Mill short 5mm | € 7.99 (sans TVA) |
| Mini End Mill short 5.5mm | € 7.99 (sans TVA) |
| Mini End Mill short 6mm | € 7.99 (sans TVA) |
| Mini End Mill long 2mm | € 8.99 (sans TVA) |
| Mini End Mill long 2.5mm | € 8.99 (sans TVA) |
| Mini End Mill long 3mm | € 8.99 (sans TVA) |
| Mini End Mill long 3.5mm | € 8.99 (sans TVA) |
| Mini End Mill long 4mm | € 8.99 (sans TVA) |
| Mini End Mill long 4.5mm | € 8.99 (sans TVA) |
| Mini End Mill long 5mm | € 8.99 (sans TVA) |
| Mini End Mill long 5.5mm | € 8.99 (sans TVA) |
| Mini End Mill long 6mm | € 8.99 (sans TVA) |
Mini End Mills, Two Flutes
Ce sont les plus petites fraises en bout que nous pouvons offrir. Descendre à 0.80mm. Les moulins ont 2 cannelures et un transport très bon des morceaux.| Mini Mill 2 flutes 0.40mm | € 9.20 (sans TVA) |
| Mini Mill 2 flutes 0.50mm | € 9.20 (sans TVA) |
| Mini Mill 2 flutes 0.60mm | € 9.20 (sans TVA) |
| Mini Mill 2 flutes 0.70mm | € 9.20 (sans TVA) |
| Mini Mill 2 flutes 0.80mm | € 7.52 (sans TVA) |
| Mini Mill 2 flutes 0.90mm | € 7.52 (sans TVA) |
| Mini Mill 2 flutes 1.00mm | € 7.52 (sans TVA) |
| Mini Mill 2 flutes 1.10mm | € 7.52 (sans TVA) |
| Mini Mill 2 flutes 1.20mm | € 7.52 (sans TVA) |
| Mini Mill 2 flutes 1.30mm | € 7.52 (sans TVA) |
| Mini Mill 2 flutes 1.40mm | € 7.52 (sans TVA) |
| Mini Mill 2 flutes 1.50mm | € 7.52 (sans TVA) |
| Mini Mill 2 flutes 2.00mm : | € 7.52 (sans TVA) |
| Mini Mill 2 flutes 3.00mm | € 7.52 (sans TVA) |
VHM-Endmill-Alu-2 Flute
Ces endmills de deux coupeurs approprié particulièrement aux alliages de cuivre d'aluminium de découpage, en plastique et (métaux non ferreux). Ils sont faits à partir du carbid plein (VHM).| 1.00mm VHM-Endmill-Alu-2 Flute | € 12.99 (sans TVA) |
| 1.50mm VHM-Endmill-Alu-2 Flute | € 12.99 (sans TVA) |
| 2.00mm VHM-Endmill-Alu-2 Flute | € 11.49 (sans TVA) |
| 2.50mm VHM-Endmill-Alu-2 Flute | € 11.49 (sans TVA) |
| 3.00mm VHM-Endmill-Alu-2 Flute | € 10.99 (sans TVA) |
| 4.00mm VHM-Endmill-Alu-2 Flute | € 12.99 (sans TVA) |
| 5.00mm VHM-Endmill-Alu-2 Flute | € 15.49 (sans TVA) |
| 6.00mm VHM-Endmill-Alu-2 Flute | € 18.99 (sans TVA) |
| 8.00mm VHM-Endmill-Alu-2 Flute | € 26.99 (sans TVA) |
| 10.00mm VHM-Endmill-Alu-2 Flute | € 40.49 (sans TVA) |
| 12.00mm VHM-Endmill-Alu-2 Flute | € 53.99 (sans TVA) |
| 14.00mm VHM-Endmill-Alu-2 Flute | € 76.49 (sans TVA) |
| 16.00mm VHM-Endmill-Alu-2 Flute | € 103.49 (sans TVA) |
| 18.00mm VHM-Endmill-Alu-2 Flute | € 134.99 (sans TVA) |
| 20.00mm VHM-Endmill-Alu-2 Flute | € 179.99 (sans TVA) |
VHM-Mini-Ballnose Endmills
These mills are for those doing real 3D milling or 4th axis work. Due to the long cutting edges, they are very versatile. Allowing more material to be removed in a single pass| VHM BallnoseLong 1mm | € 16.99 (sans TVA) |
| VHM BallnoseLong 1,5mm | € 16.99 (sans TVA) |
| VHM BallnoseLong 2mm | € 16.99 (sans TVA) |
| VHM BallnoseLong 2,5mm | € 16.99 (sans TVA) |
| VHM BallnoseLong 3mm | € 16.99 (sans TVA) |
Extra long mill with relieved shaft
Fraises carbure monobloc extra longue et avec un arbre liberé. Le diamètre de la partie liberé de l'arbre est plus petite que la pointe de l'outil et le reste de l'arbre afin de l'arbre ne touche pas le matériau lors du fraisage.| Extra long mill with relieved shaft 8.00mm | € 64.99 (sans TVA) |
Breaking news
NOUVEAU PRODUIT 4.0NM NEMA 34 moteur
Une alternative à faible coût le moteur 4,5 nm, nous avions déjà.2011-11-13
NOUVEAU produit CPU/Sensor Holder
Un produit Tous USBCNC qui protègent votre CPU, et permet une connexion facile des capteurs de référence, d'arrêt d'urgence, et volant de sonde MPG2011-09-07
New language added.
Now also available in Spanish. Ahora también disponible en español (haz click en la bandera de españa).
We supply worldwide!
