Stepper Drive ND556 (HP 5056) 50V 5,6A (2phase)
Article number 696
Leadshine
Price on request
Description
Attachments
Replaced by product
We no longer sell this product. It has been replaced by the EM556S, which is always in stock. The EM556S has improved technology and performance, for the same price. The part you need is DamenCNC partnr 5203. You can also search in our search bar for EM556S.
This driver comes tested and assembled. Is great for the bigger applications. Converting a large lathe like an AI or a bridgeport mill is not uncommon for these drivers. The driver can be connected to the interface kit offered in electronic parts. Combination with 2amp and 4amp drivers is possible.
Component features:
-
Current adjustable from 1A to 4A effective. 1.4 to 5.6 A in 8 steps with DIP switches
-
Motorvoltage 20-50 Volt
-
Automatic sleep mode 50% current reduction. (DIP switchable)
-
Smooth motor performance. Marginal motor and driver heat generation due to patented technology
-
Optocoupler inputs (Step, Direction, Enable)
-
Over 300khz step rate
-
Connection to LPT port using interface or microcontroller
-
15 microstep modes, binary 2 to 128, decimal 5 to 125 (DIP)
-
Suitable for bipolar motors up to 5,6A peak current. With 4,6, or 8 wires
-
Dimensions (118x76x33mm)
-
Weight: about 280 grams
-
Closed metal box cab be mounted upright or laying down
-
Over voltage and short circuit protected
Attachments
Here you can find all attachments that are linked to the product. Click on the icon to download.
696 HP5056 Dutch Manaul | |
696 HP5056 UK Manual | |
696 Leadshine M556 STEP214 |
Advanced Digital Stepper Drive EM556S 50V 5,6A (2phase)
In Stock
€70,00
Excluding VAT
Price per piece