Zoeken
Winkelmandje
 
Op elkaar afgestemde kwaliteitsproducten Op elkaar afgestemde
kwaliteitsproducten
Op elkaar afgestemde kwaliteitsproducten 10 jaar CNC-ervaring
Toewijding & Vakmanschap
3d files 3D Step of CAD files
Zodat u kunt tekenen
Instellen Vooraf ingesteld
Zoals u wenst
Voorraad Bijna alle artikelen
Uit voorraad verzonden
Verzendkosten Gratis verzonden in NL
vanaf € 250,- ex. BTW.

 

Toon lijst Volgend artikel
https://www.damencnc.com/assortiment/cnc-accessoires/cnc-meetgereedschap/z-nano-toolsetter-including-cable-cleaning-nozzle/_404_w_263_2594_NL_1

Z-NANO Toolsetter (Including cable & cleaning nozzle)

Artikelnummer4474
Blum Novotest
Niet op voorraadNiet op voorraad
1.249,99 exclusief btw
Configureer uw product
Omschrijving
Bijlagen

This toolsetter from BLUM-NOVOTEST is the most precise and high end toolsetter we provide. It is for the demanding customer, who needs an industrial solution. This probe is very precise 0,5um repeating accuracy. By default we include the cleaning nozzle, this allows you to clean the measuring surface with compressed air, before you do a measurement. (you do need to order a pneumatic valve and some other components to make this work) This probe has about 10mm extra stroke after the trigger point, this allows you to measure at high speeds.

Component Eigenschappen:

  • Reliable tool measuring and breakage detection under the most adverse conditions
  • Repeatability 0.5um
  • Maximum probing speed 2000mm/min (2m/min) (78 inch/min)
  • Minimum Tool Diameter: >0,1mm (depending on geometry of the tool, probing force must not result in damage to the tool)
  • Degree of protection: IP68
  • Exchangable measuring surface ( plasma nitraded (standard) or carbide surface )
  • Extremely robust
  • Very Low Measuring Force (Vertical mounted 2.2N)(Horizontal 3.0N)
  • Low measuring force allows measuring very small or sensitive tools
  • Including cleaning nozzle (you need additional pneumatic parts to make it complete)
  • Including 10 meters of PUR cable and 1,5 meter of spiral shielding hose
  • Including h=14mm Mounting socket
  • Optional:  Mounting sockets up to L=200mm
  • Optional:  Pneumatic parts to make complete set
  • Optional: different type Z-NANO IR, communicates through infrared transmission (requires also a receiver)
  • Warning: advised pressure for nozzle minimum 3bar (0,3 MPa) maximum 8bar (0,8 MPa)
  • Warning: damage to measuring by short circuit is possible, connect each individual wire to its own terminal


Bijlagen

Hier staan alle bijlagen van dit artikel. Klik op het icoon om deze te downloaden.

4474 Blum Novotest Z-Nano Brochure English