Zoeken
Winkelmandje
 
Op elkaar afgestemde kwaliteitsproducten Op elkaar afgestemde
kwaliteitsproducten
Op elkaar afgestemde kwaliteitsproducten 10 jaar CNC-ervaring
Toewijding & Vakmanschap
3d files 3D Step of CAD files
Zodat u kunt tekenen
Instellen Vooraf ingesteld
Zoals u wenst
Voorraad Bijna alle artikelen
Uit voorraad verzonden
Verzendkosten Gratis verzonden in NL
vanaf € 250,- ex. BTW.

 

Vorig artikel Toon lijst Volgend artikel
https://www.damencnc.com/assortiment/cnc-besturingen/edingcnc-aka-usbcnc/cpu5b-accessoires/driver-compatibility-pcb-hbs86-es-d808-em806/_404_w_163_1502_NL_1

Driver Compatibility PCB HBS86 / ES-D808 / EM806

Artikelnummer2150
DamenCNC
Goed op voorraadGoed op voorraad
Algemene condities
Aantallen 5 - > 10,00 % op de verkoopadviesprijs van € 9,99 € 8,99
Aantallen 10 - > 20,00 % op de verkoopadviesprijs van € 9,99 € 7,99
9,99 exclusief btw
Configureer uw product
Omschrijving
Korting

USBCNC CPU V3 V4 and V5B use 10 pole ribbon cable (flat cable) to make connections to the stepper drives or servo drives. Since often mistakes were made here in wiring, we developed already a few years ago a small PCB that goes into the stepper drive. Then no wiring is needed anymore. We recently also made this board for the HBS86 closed loop driver. All that is needed is a 10 pole ribbon cable between the USBCNC CPU and the stepperdrives. It will save you a lot of time and headache during wiring of your CNC controller. (note for CPU5A this system will only work if you buy the additional DamenCNC interface, the standard CPU5A uses an SUB-D connector.) It's also possible to connect the fault feedback, when the drive is in error. This only works with USBCNC CPU v5B. The others CPUs simply don't have the input for it. Keep in mind that this fault feedback is only software driven, so not safe enough for CE. We have a more extended version of this PCB that we use in the RTR Closed Loop. But since its quite complicated to connect, we don't sell it separately.


Component eigenschappen:

  • Compatible with HBS86 drive
  • Possible to feedback drive error to USBCNC (CPU 5B only!)
  • Compatible with V3, V4, V5B

Prijsafspraken

Hieronder ziet u uw persoonlijke prijsafspraken.

Algemene condities
Aantallen 5 - > 10,00 % op de verkoopadviesprijs van € 9,99 € 8,99
Aantallen 10 - > 20,00 % op de verkoopadviesprijs van € 9,99 € 7,99