Zoeken
Winkelmandje
 
Op elkaar afgestemde kwaliteitsproducten Op elkaar afgestemde
kwaliteitsproducten
Op elkaar afgestemde kwaliteitsproducten 10 jaar CNC-ervaring
Toewijding & Vakmanschap
3d files 3D Step of CAD files
Zodat u kunt tekenen
Instellen Vooraf ingesteld
Zoals u wenst
Voorraad Bijna alle artikelen
Uit voorraad verzonden
Verzendkosten Gratis verzonden in NL
vanaf € 250,- ex. BTW.

 

Vorig artikel Toon lijst
https://www.damencnc.com/assortiment/frees-motoren/kress/kress-accessoires/floatinghead-for-engraving/_404_w_42_679_NL_1

FloatingHead for engraving

Artikelnummer2103
Haase
Goed op voorraadGoed op voorraad
238,99 exclusief btw
Configureer uw product
Omschrijving

For fine engraving work often a floating head is used. The reason you need a floating head/depth controller is simple. When making for example a line thickness of 0.2mm with a V engraving bit, the width of the line will change if the table or material is not exactly flat. Since no table of a CNC machine is flat over the entire surface within a hundreds of a mm., a solution needs to be found to keep the tool at the exact same depth over the entire area. This floating head offers this solution. Using a fine thread the depth can be adjusted. Then since the head is mounted using springs, it's possible to engrave even if the surface is not exactly flat, a few mm deviation is possible. To prevent scratching of the surface, using a spring and thread, it's also possible to adjust the surface pressure. Also the engraving head can be locked in case you need to do normal milling or drilling, so it is not required to remove the floating head when not engraving.


Component eigenschappen:

  • 43mm mount compatible with AMB KRESS milling motors
  • Mount is interchangable for other motors (TeknoMotor)
  • Compatible with Haase AL640 machine
  • Keyway and keys inlcluded for easy alignment
  • Depth of engraving adjustable via a dial
  • Surface pressure adjustable with thread/allen wrench
  • When not engraving, the head can be locked, removing it is not needed