Menu
0
Categories
Search
Shopping cart
 
Op elkaar afgestemde kwaliteitsproducten Compatible products
Of excellent quality
Op elkaar afgestemde kwaliteitsproducten 10 years of CNC-experience
Dedication & Craftmanship
3d files 3D Step or CAD files
For easy 3D modeling
Instellen Configured
As you wish
Voorraad Almost all parts
Shipped from our stock

 

Previous article Show list Next article
{canonicalURL}

Driver compatibility PCB DM2282

Article number 2421
DamenCNC
In Stock In Stock
General conditions
Numbers 5 - > 10,00 % on the retail price of € 9,99 € 8,99
Numbers 10 - > 20,00 % on the retail price of € 9,99 € 7,99
9,99 Excluded VAT Price per piece
Description
Discount

USBCNC CPU V3 V4 and V5B use 10 pole ribbon cable (flat cable) to make connections to the stepper drives or servo drives. Since often mistakes were made here in wiring, we developed already a few years ago a small PCB that goes into the stepper drive. Then no wiring is needed anymore. We recently also made this board for the DM2282 driver. All that is needed is a 10 pole ribbon cable between the USBCNC CPU and the stepperdrives. It will save you a lot of time and headache during wiring of your CNC controller. (note for CPU5A this system will only work if you buy the additional DamenCNC interface, the standard CPU5A uses an SUB-D connector.) It's also possible to connect the fault feedback, when the drive is in error. This only works with USBCNC CPU v5B. The other CPUs simply don't have the input for it. Keep in mind that this fault feedback is only software driven, so not safe enough for CE.


Component features:

  • Compatible with USBCNC CPU v4 and v5B
  • For Leadshine DM2282 digital stepperdriver

Price agreement

Below you will find you personal price agreements.

General conditions
Numbers 5 - > 10,00 % on the retail price of € 9,99 € 8,99
Numbers 10 - > 20,00 % on the retail price of € 9,99 € 7,99