Previous article | Show list | Next article |
M5 Counterbore Drill Ø10.0mm, pilot Ø5.3mm DIN 373 Fine (0214001000100)
Article number 5403
Maykestag
In Stock
General conditions | ||
Quantity 5 - > | 10,00 % on the retail price of €25,00 | €22,50 |
Quantity 10 - > | 20,00 % on the retail price of €25,00 | €20,00 |
€25,00
Excluding VAT
Price per piece
Description
Discount
Compatible Products
Special drills used to make counterbores that are often required when using bolts that have a hex drive. Common in DIN912 bolts, but also DIN6912, and DIN794, and DIN 84. Before using this special drill, it's required to drill a pilot hole that matches the size of the guidance pin, on the drill. In the 2D dimensional drawing, it's the d1 dimension. In the compatible products tab, we also have a link to the correct drill, we advise for drilling the pilot hole.
Component features:
- Pilothole diameter d1: 5.30mm
- Counterbore diameter d2: 10.00mm
- Shaft/collet size d3: 8.00mm
- Total Length L1: 80.00mm
- Cutting edge length L2: 18.00mm
- Number of teeth Z: 3
- Maykestag part number : 2140010001
Price agreement
Below you will find you personal price agreements.
|
Single ER 16 Collet 8.00mm Swiss Quality
€21,00
Excluding VAT
Price per piece
Single ER 20 Collet 8.00mm Swiss Quality
€22,00
Excluding VAT
Price per piece
Single ER 25 Collet 8.00mm Swiss Quality
€22,00
Excluding VAT
Price per piece
Single ER 32 Collet 8.00mm Swiss Quality
€24,00
Excluding VAT
Price per piece
Ø5,3 bore x 10mm length, Drill bushing with collar Ø13,0xL3,0mm DIN172A
Ø5,3 bore x 10mm length, Drill bushing with collar Ø13,0xL3,0mm DIN172A
Article number5412
In Stock
€5,99
Excluding VAT
Price per piece
5,30 mm Jobber Drill DIN 338 (0060100530100)
€3,49
Excluding VAT
Price per piece