Previous article | Show list | Next article |
Rack and Pinion Systems Gear Module 2 Z=21 teeth
Article number 861
In Stock
General conditions | ||
Quantity 5 - > | 10,00 % on the retail price of €7,80 | €7,02 |
Quantity 10 - > | 20,00 % on the retail price of €7,80 | €6,24 |
Quantity 50 - > | 30,00 % on the retail price of €7,80 | €5,46 |
€7,80
Excluding VAT
Price per piece
Description
Discount
Module 2,0 gears are used in combination with the module 2 racks we sell. Most often a gearbox is needed in the system. Even with a small gear of 15 teeth the total distance travelled in one rotation is already 94.2mm. If a steppermotor or servo was directly attached this would result in a very fast system. Assuming a motor runs 1000 RPM, that would mean a feedrate of 94200mm/min. Most often we use a 1:10 gearbox so the max feedrate is reduced to 9420mm/min. Take this into account when designing a machine with rack and pinion.
Component features:
- Material C45 steel
- Total gear width (HUB+gear) 35mm
- Gear width 20mm
- Pressure angle 20 degrees
Price agreement
Below you will find you personal price agreements.
|