Search
Shopping cart
 
Op elkaar afgestemde kwaliteitsproducten Compatible products
Of excellent quality
Op elkaar afgestemde kwaliteitsproducten 10 years of CNC-experience
Dedication & Craftmanship
3d files 3D Step or CAD files
For easy 3D modeling
Instellen Configured
As you wish
Voorraad Almost all parts
Shipped from our stock

 

Previous article Show list Next article
https://www.damencnc.com/products/machines/cnc-milling-machines/damencnc-haase-al-series/fogbuster-dual-head-mounted-on-haase-al-series/_404_w_244_1943_GB_1

Fogbuster Dual Head mounted on HAASE AL Series

Article number3431
Not in stockNot in stock
1.299,99 Excluding VAT
Configure your product
Description

If you wish to mill aluminum sheets on the DamenCNC Haase AL series, we advise to add this option. The Fogbuster is the best coolant system we have found so far. The dual head is perfect, since you can spray the coolant under 2 angles at the cutter. If you are milling plastics or other products that do not require coolant, it is also possible to close the coolant adjustment screw, and only spray air. This can help to remove chips from your product.


Component features:

  • Fully mounted and tested on DamenCNC Haase AL640 1065 or 1290
  • Can only be purchased in combination with a machine, so that we can mount and test it on the machine for you.
  • As a basis we use the Fogbuster Dual Head set of parts
  • Custom made bracket are used for mounting to the CNC machine.
  • The Fogbuster nozzles are stationary, and do not move up or down with Z-axis movement to prevent collisions with the workpiece
  • We included the Valve, and all electronics required to switch on/off coolant using the CNC controller (mounted and tested)