Search
Shopping cart
 
Previous article Show list Next article
https://www.damencnc.com/products/mechanical-components/ballscrew-support-units/bk-fixed-ballscrew-support-units/bk17-fixed-ballscrew-support-c3-quality/_404_w_309_1439_GB_1

BK17 Fixed Ballscrew Support (C3 quality)

Article number3897
In StockIn Stock
Algemene condities
Amount 3 - > 5,00 % on the retail price of € 69,99 € 66,49
Amount 5 - > 10,00 % on the retail price of € 69,99 € 62,99
Amount 10 - > 15,00 % on the retail price of € 69,99 € 59,49
Amount 20 - > 20,00 % on the retail price of € 69,99 € 55,99
69,99 Excluding VAT Price per piece
Configure your product
Description
Attachments
Discount

This type of ballscrew support is very common in the DIY CNC world. It never had our preference, since it's not so easy to mount a stepper motor or servo to this support. We have engineered our own mounting blocks like the DCNC BearingBlock for the 16mm ISEL spindels which is much easier to mount (part nr 830). But we see that clients keep on requesting these blocks. Further we see that when you wish to drive the ballscrew with a belt, this is a good and easy standard solution. So we decided to start sales of these products as well. There are many BK blocks on the market, and the problem is, they all look the same. Prices differ greatly. We have chosen to buy/sell only the highest quality bearings (P5 Taiwan) suitable for ballscrews in quality class C3 through-C10. The blocks we have in stock with the high quality bearings is the type that can be made backlash free, by adjusting the pre-load on the angular contact bearings. Be aware that many webshops offer only the C7 type, which has normal deep groove bearings, and then don't have any pre-load, which means you will have backlash in axial direction. When you add the BK support to your cart, the website, will advise the correct BF Floating Support, which is needed on the other side of the ballscrew.


Component features:

  • Steel Housing
  • Axial angular contact bearings
  • C3 High Quality bearings made in TAIWAN (don't compare price with C7, it's much lower quality)
  • Adjustable pre-load allowing zero axial backlash (not possible with C7!)
  • Scope of delivery: Housing + Bearings + 2 Spacers + Locking nut
  • This type of bearing block is used on the fixed side of the ballscrew, for taking the axial + radial loads
  • Exchangeable with other brands like THK, NSK, MISUMI, KURODA

Attachments

Here you can find all attachments that are linked to the product. Click on the icon to download.

3897 BK17 STEP214

Price agreement

Below you will find you personal price agreements.

Algemene condities
Amount 3 - > 5,00 % on the retail price of € 69,99 € 66,49
Amount 5 - > 10,00 % on the retail price of € 69,99 € 62,99
Amount 10 - > 15,00 % on the retail price of € 69,99 € 59,49
Amount 20 - > 20,00 % on the retail price of € 69,99 € 55,99