| Previous article | Show list | Next article |
Electronic Cylinder ISO15555-B80-S400-P10-Inline-Anti rotation-IP55 IP65
Not in stock
Keep me updated
Unfortunately, the product is currently sold out. Leave your details and you'll receive an e-mail when it's back in stock.
| General conditions | ||
| Quantity 5 - > | 5,00 % on the retail price of €2.400,00 | €2.280,00 |
| Quantity 10 - > | 10,00 % on the retail price of €2.400,00 | €2.160,00 |
An electronic cylinder with a connection interface compliant with ISO 15555. The type offered here has a bore of 80 mm. The piston rod extension is controlled by a system with a hardened ball screw and a recirculating ball nut. The type we offer here features an internal ball screw with a pitch of 10 mm and a diameter of 32 mm. Within this 80 mm bore size, we can produce pitches of 5 mm, 10 mm, and 32 mm. The electronic cylinders can be custom-made to your desired stroke length. This specific model has a stroke of 400 mm, but this can also be adjusted as desired. To use accessories such as hinges, it is better to use the model with a gearbox (NOTE: Not the one we offer here). The gear ratio is 1:1, and with the gearbox, you can mount the hinge at the bottom. When using the inline models, it is not possible to mount the hinges on the stepper motor or servo motor, meaning that only a central hinge is possible in that case. The type we offer here features a built-in anti-rotation system. This means that the M20x1.5 thread is not freely rotatable (as with a pneumatic cylinder); this is useful for many applications, but it can also be customized to your specific requirements. The protection rating can be IP40 or IP55-65. We offer it here with IP55-65, which is also what we recommend for custom projects. The price difference is very small, and it means that your ball screw is better protected against water, dust, etc. The electronic cylinders can be adapted to your servo or stepper motors of choice. The type we offer here has a flange suitable for a 090 series gearbox, allowing you to mount standard 090 series gearboxes with a shaft diameter of 22mm. We have also custom-made other electronic cylinders, where the flanges are designed for an 80x80 servo or a NEMA34 stepper motor. A fully custom solution is possible. In that case, please contact us for a quotation. Furthermore, it is important to note that we always thoroughly calculate the drive specifications. The fact that a NEMA34 flange is attached does not mean that you can mount the heaviest NEMA 34 motor. For this type with a 10mm pitch in combination with a 1000W 3000RPM Delta servo, we recommend a maximum nominal torque of 3.31Nm. This results in a maximum output force of approximately 9354 Newtons. For the lifespan of the cylinder, it is better to stay well below this—think 4000N—as this will ensure the longest service life, at 10,000 km.
Component Features:
- Electronic cylinder ISO-15555
- Bore: 80 mm
- Stroke length: 400 mm
- Ball screw diameter: 32 mm
- Ball screw pitch: 10 mm
- Inline or gear version: Inline
- Anti-rotation model (piston rod is not freely rotatable)
- Protection degree: IP55-IP65 (depending on the type of servo motor)
- Flange: Special type suitable for 1:5 PAE90 gearboxes (Apex, Sesame, and many other brands)
- Maximum speed: 100 mm/s (6,000 mm/min) (based on a 1:5, 1000W, 3000RPM servo; this therefore depends on the reduction gear and servo motor used)
- Maximum input torque: 3.31 Nm (nominal, 300%) (temporarily permitted)
- Nominal delivered axial force: 9354N (approx. 954kg pushing force)
- Maximum delivered axial force: 28062N (approx. 2861kg pushing force)
- Brand: MetalWork
- Made in Italy
Attachments
Here you can find all attachments that are linked to the product. Click on the icon to download.
Price agreement
Below you will find you personal price agreements.
| |||||||||
Limited stock








