EPS EVA Conical Foam Milling Cutter D16.0mm R3.0 FL250mm L300mm 3 teeth

These cutting tools are often used in robotic milling projects. They are extremely long and thin, allowing you to easily access all sorts of details in a project. However, be careful, as their extreme length makes them very susceptible to breakage or buckling out of plane. We recommend always running the milling motors at less than 6000 RPM and using very limited depth of cut. Otherwise, they will flex excessively, which can cause vibration and problems with your milling motor.

We recommend first roughing out the part, with a more stable tool, and then finishing with this one.

Component features:

• Steel tooling (cheap but very effective)
• Cutting tools often used in CNC milling surfboards can also be used in rigid foams such as EPS
• Total length: 300mm
• Flute length: 250mm
• Shape: Conical from 16mm diameter to 5mm diameter
• Shaft dimensions: 16mm diameter x 50mm length
• Nose radius: 2,5mm
• CAUTION: Due to the extreme length, keep the RPM below 6000 RPM and feed it in slowly
• CAUTION: Risk of tool breakage and/or damage to the milling motor if these instructions are not followed.