EPS EVA Face Milling Cutter D60 d16 FL40mm L130mm 10 teeth

These cutting tools are often used in robotic milling projects. They are extremely long and thin, allowing you to easily access all sorts of details in a project. However, be careful, as their extreme length makes them very susceptible to breakage or buckling out of plane. We recommend always running the milling motors at less than 6000 rpm and using a very shallow cutting depth. Otherwise, they will flex excessively, which can lead to vibration and problems with your milling motor.

We recommend roughing the part first with a more stable milling tool and then finishing it with that tool.

Component Features:

• Steel tool (inexpensive but very effective)
• Cutting tools often used in CNC milling surfboards can also be used in rigid foams such as EPS
• Overall length: 130 mm
• Cutting edge length: 38-40 mm
• Shape: Face mill 60 mm diameter
• Shaft dimensions: 16 mm diameter x 80 mm length
• Nose radius: none
• CAUTION: Due to the extreme length, keep the speed below 6000 rpm and feed the cutter slowly.
• CAUTION: Risk of tool breakage and/or damage to the milling motor if these instructions are not followed.