| Previous article | Show list |
Hotwire Conductor Connection - Brass Ø29mm - Ø16mm Clamp Interface
In Stock
| General conditions | ||
| Quantity 5 - > | 10,00 % on the retail price of €48,00 | €43,20 |
| Quantity 10 - > | 20,00 % on the retail price of €48,00 | €38,40 |
| Quantity 25 - > | 30,00 % on the retail price of €48,00 | €33,60 |
| Quantity 100 - > | 40,00 % on the retail price of €48,00 | €28,80 |
When designing or working with hotwire systems. A common issue is that the area where the hotwire is connected to electricity has a tendency to wear. Often copper connections are used because these have a better electric conductivity. But the problem is that copper is very soft. So when you also have mechanical loads, which are present in any hotwire system, this gives issues. Each heat cycle when a wire goes from cold to hot, and then back to cold, the issue is that the wire expands and then shrinks, this makes it move across the surface. For this reason we have chosen Brass, which is much more wear resistant. We use a relatively large diameter at the contact point between the wire and the brass of 27mm diameter. This has 2 reasons. The first is to increase the contact area, to reduce heat and arcing issues. The second is that the wire then has a more friendly bending radius. Other systems often use a smaller radius, which increases bending/wear of the hotwire. Our systems are designed to run 24/7 in industrial systems. In our experience the solution we have made works great in CNC and Robotic hot wire cutting systems.
Component features:
- Spare Part for DamenCNC Wire Cutting System
- Material: Brass
- Electrical connection: M8 thread
- Mechanical connection: 16mm clamp interface
- See compatible products tab, for the accessoires that fit this item.
Attachments
Here you can find all attachments that are linked to the product. Click on the icon to download.
Price agreement
Below you will find you personal price agreements.
| |||||||||||||||
In Stock











