Show list | Next article |
M3 Counterbore Drill Ø6.0mm, pilot Ø3.2mm DIN 373 Fine (0214000600100)
Article number 5401
Maykestag
Limited stock
General conditions | ||
Quantity 5 - > | 10,00 % on the retail price of €23,99 | €21,59 |
Quantity 10 - > | 20,00 % on the retail price of €23,99 | €19,19 |
€23,99
Excluding VAT
Price per piece
Description
Discount
Compatible Products
Special drills used to make counterbores that are often required when using bolts that have a hex drive. Common in DIN912 bolts, but also DIN6912, and DIN794, and DIN 84. Before using this special drill, it's required to drill a pilot hole that matches the size of the guidance pin, on the drill. In the 2D dimensional drawing, it's the d1 dimension. In the compatible products tab, we also have a link to the correct drill, we advise for drilling the pilot hole.
Component features:
- Pilothole diameter d1: 3.20mm
- Counterbore diameter d2: 6.00mm
- Shaft/collet size d3: 5.00mm
- Total Length L1:71.00mm
- Cutting edge length L2: 14.00mm
- Number of teeth Z: 3
- Maykestag part number : 2140006001
Price agreement
Below you will find you personal price agreements.
|
Single ER 11 Collet 5.00mm Swiss Quality
€22,00
Excluding VAT
Price per piece
Single ER 16 Collet 5.00mm Swiss Quality
€21,00
Excluding VAT
Price per piece
Single ER 20 Collet 5.00mm Swiss Quality
€22,00
Excluding VAT
Price per piece
Single ER 25 Collet 5.00mm Swiss Quality
€22,00
Excluding VAT
Price per piece
Single ER 32 Collet 5.00mm Swiss Quality
€24,00
Excluding VAT
Price per piece
Ø3,2 bore x 8mm length, Drill bushing with collar Ø9,0xL2,5mm DIN172A
Ø3,2 bore x 8mm length, Drill bushing with collar Ø9,0xL2,5mm DIN172A
Article number5423
In Stock
€5,49
Excluding VAT
Price per piece
3,20 mm Jobber Drill DIN 338 (0060100320100)
€2,29
Excluding VAT
Price per piece