Pneumatic Clamp PS-150-AL

Very simple and effective pneumatic clamp. You can turn the clamping force on and off by the flip of a switch. These clamps are great because when you have a T-slot table with a pitch of 100mm between the T-slots, like the ISEL PT system, you can set the position of the clamp simply by sliding it back and forth on the T-slot and tightening the bolts. The pneumatic stroke of the piston itself is only 5mm, but because you can adjust the back jaw, and the clamping jaw, very large workpieces can be effectively and quickly clamped. The jaws that are included have a small ledge in them, this allows also very small products to be clamped in between them. Another advantage compared to a vacuum table, is that you are able to mill and drill through the part without damaging anything, the ridge that the product sits on in the jaw is only 3mm wide, so very little space is lost due to clamping. Another advantage is that you can change the amount of clamping force by changing the pneumatic pressure. In this way you can prevent small or thin products from being damaged by too much clamping force. Overall this is a very nice clamping system to have on your CNC machine, because its simple, flexible, and versatile.

Component features:

• Chuck jaw dimensions: 150 x 39.6 mm
• Chuck jaw material: aluminium
• Body material: cast alumium hard anodised
• Minimum required pressure: 2 bar
• Maximum allowed pressure: 10 bar
• Jaw Stroke: 5 mm
• Diameter mountingholes: 9 mm (suitable for m8 bolts through)
• Pitch of mounting holes: 100mm (suitable for T-slots with 100mm pitch)
• Double acting piston
• Exchangeable chuck jaws
• With integrated workpiece stop

Clamping Force:

• 2 bar: 726,6 N (approximately 74.0 kg)
• 4 bar: 1453,2 N (approximately 148.13 kg)
• 6 bar: 2179,8 N (approximately 222.20 kg)
• 8 bar: 2906,0 N (approximately 296.23 kg)
• 10 bar: 3633,0 N (approximately 370.34 kg)

Scope of delivery:

• One Pneumatic clamp
• One Counter jaw with workpiece stop
• One toolbox for easy storage