Op elkaar afgestemde kwaliteitsproducten Op elkaar afgestemde
Op elkaar afgestemde kwaliteitsproducten 15 jaar CNC-ervaring
Toewijding & Vakmanschap
3d files 3D Step of CAD files
Zodat u kunt tekenen
Instellen Vooraf ingesteld
Zoals u wenst
Voorraad Bijna alle artikelen
Uit voorraad verzonden
Verzendkosten Gratis verzonden in NL
vanaf € 250,- ex. BTW.

Toon lijst

Z-NANO IR Toolsetter (Including cleaning nozzle)

Artikelnummer 4728
Blum Novotest
Niet op voorraad Niet op voorraad
2.819,99 exclusief btw Prijs per stuk
Compatibele Producten

This toolsetter from BLUM-NOVOTEST is the most precise and high end toolsetter we provide. It is for the demanding customer, who needs an industrial solution. This probe is very precise 0,5um repeating accuracy. By default we include the cleaning nozzle, this allows you to clean the measuring surface with compressed air, before you do a measurement. (you do need to order a pneumatic valve and some other components to make this work) This probe has about 10mm extra stroke after the trigger point, this allows you to measure at high speeds. The model we offer here, is the Infrared Version, it requires an Infrared received (NOT INCLUDED with the delivery). Most often clients buy a TC52, that has the infrared receiver included. (If in doubt, contact us, and we can make a proper quote)

Component Eigenschappen:

  • Reliable tool measuring and breakage detection under the most adverse conditions
  • Repeatability 0.5um
  • Maximum probing speed 2000mm/min (2m/min) (78 inch/min)
  • Minimum Tool Diameter: >0,1mm (depending on geometry of the tool, probing force must not result in damage to the tool)
  • Degree of protection: IP68
  • Exchangable measuring surface ( plasma nitraded (standard) or carbide surface )
  • Extremely robust
  • Very Low Measuring Force (Vertical mounted 2.2N)(Horizontal 3.0N)
  • Low measuring force allows measuring very small or sensitive tools
  • Including cleaning nozzle (you need additional pneumatic parts to make it complete)
  • Including 10 meters of PUR cable and 1,5 meter of spiral shielding hose
  • Including h=14mm Mounting socket
  • Optional:  Mounting sockets up to L=200mm
  • Optional:  Pneumatic parts to make complete set
  • Optional: Infrared transmission receiver IC56 and interface IF59 
  • Warning: advised pressure for nozzle minimum 3bar (0,3 MPa) maximum 8bar (0,8 MPa)
  • Warning: damage to measuring by short circuit is possible, connect each individual wire to its own terminal


Hier staan alle bijlagen van dit artikel. Klik op het icoon om deze te downloaden.

4728-1_Blum_Novotest_Z-Nano_IR_Brochure_English.pdf 4728-1 Blum Novotest Z-Nano IR Brochure English