ITP15 LED Bar Graph Display 0(2)-10V or 0(4)-20ma

The ITP15 Bar Graph Display is a compact panel-mount process indicator that is intended to visualize an analog input signal in the range from 0 to 100% with 10 bars 10% each. The input signal can be either a linear voltage signal of 0(2)-10 V or a current signal of 0(4)-20 mA.

Due to the cylindrical form of the mounting part of the enclosure, the ITP15 bar graph panel meter can be positioned either vertically or horizontally without changing the mounting cutout. This LED bar graph indicator fits into a standard cutout of Ø22.5 mm. The cutouts of this diameter are commonly used for mounting standard signal lamps or push buttons at control cabinets or panels.

Along with indication, a simple on-off control can be implemented with the NPN transistor output of the ITP15. This output can control a load of up to 200 mA, 42 VDC.

We often use these panel meters, to give a visual indication for the amount of power a VFD or servo driver is using. The Delta Electrnocs VFDs and Servo drivers, have a monitor output that gives a 0-10V signal that can be easily coupled to this display.

Component features:

• Bar graph indication of the measured value
• Display range 0...100% (in steps of 10%)
• 10 two-color bars (green/red) 10% each
• Configurable analog input (0-5 mA, 0(4)-20mA, 0(2)-10 V)
• ON/OFF control with an NPN-transistor output
• 2 modes of blinking (fast/slow)
• Alarm settings