| Previous article | Show list |
Robot TCP Calibration Set, HSK63F, (Base Point, Short Point, LongPoint)
Not in stock
Keep me updated
Unfortunately, the product is currently sold out. Leave your details and you'll receive an e-mail when it's back in stock.
The Robot TCP Calibration set is designed to measure/find the Tool Center Point (TCP) of the robot. The intention here is to place 1x measuring tool on the fabrication plane and 2x measuring tools in an HSK63F toolholder (3135) on the robot. The measuring tools in the HSK63F toolholder are of different lengths. You use the TCP short point (6045) and the TCP long point (6046) measuring rods to accurately measure tool lengths between ~148mm & ~476mm. The measuring tool on the machining plane (6045) is supplied with an ISEL PT25 plate, so that the measuring tool can be placed stably on the fabrication plane.
The Robot TCP Calibration set can also be used to measure other objects with a robot.
Component properties:
- Tool holders: HSK63F
- Gauge length short point: ~148mm
- Gauge length long point: ~476mm
- Material points: Stainless Steel 304
- Designed to measure/find the TCP of the robot
- NOTE: The tool gauge lengths must be measured very accurately, preferably with a height gauge, otherwise you may get deviating TCP measurements.
Attachments
Here you can find all attachments that are linked to the product. Click on the icon to download.
In Stock
Limited stock
Not in stock











